KRD13 series of high energy shock test system

Model:	KRD13
Brand:	CME
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Test Bench
Label:	high energy , shock test system , shock tester
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and battery test. The system adopts the principle of pneumatic energy storage expansion, by adjusting the internal pressure, it releases high impact energy in a short stroke. It is suitable for assessing the functional reliability and structural integrity of various products under high energy shock or bump environment, so as to reproduce the shock wave energy suffered by products in the actual environment, thereby improving or optimizing the structural design or layout of the products.

Windows-based stable control system, full-automatic remote-control interface
Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
The shock energy is large, and the shock test of 70g～45ms can be easily realized.
Automatic control of lifting height with high accuracy and good repeatability
Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.
Built-in pneumatic brake mechanism, safe and reliable.
IPS-2000 shock control and measurement system can perform different shock waveforms.
Optional foundation free: Air springs and dampers are used to reduce vibration.

Technical Specifications

Model Parameters		KRD13－50	KRD13－100	KRD13－200	KRD13－500	KRD13－800	KRD13－1000	KRD13-2000
Rated Load (kg)		50	100	200	500	800	1000	2000
Table Size (mm)		500×500	600×600	800×800	1000×1000	1200×1200	1500×1500	2000×2000
Peak Acc. (g)	Half-Sine	10~1500	10~1000	10-1000	10-500	10-400	10-300	10-200
	Post-Peak Sawtooth	10~200		10~100				10-50
	Trapezoid	15-200		15-100	15-100	15-60	15-50	30-50
Pulse Duration (ms)	Half-Sine	2～60	3～60	3～60	4～60	5～60	6～60	8～60
	Post-Peak Sawtooth	3～18			6～18
	Trapezoid	3～18		6～18
Bump Waveform (Optional)		Half Sine Waveform
Bump Peak Acceleration (g)		5～100		5～80	5～60	5～40	/
Bump Pulse Duration(ms)		3～30		3～30	4～30	5～30	/
Bump Rate (Times/Min)		10~80		10~60		10-40	/
Overall Dimension (mm)		1200×1200×1500	1200×1200×1650	1100×1100×1700	1300×1300×1600	1500×1500×1700	1600×1600×1800	2000×2000×1900
Weight (kg)		3000	3800	3200	4000	5000	6000	8000
Environment		Temperature range 0～40℃, Humidity ≤ 80% (non-condensing)
Power		1-phase AC220V±10% 50Hz
Air source		≤1MPa
Installation Condition		Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment
Standards		IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-810 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580