Model: | - |
---|---|
Brand: | NJMKT MKTKJ |
Origin: | Made In China |
Category: | Industrial Supplies / Machine Hardware / Fastener & Fitting |
Label: | anchor , epoxy resion , Adhesive anchor bolt |
Price: |
-
|
Min. Order: | - |
Anti-theft Foundation Anchor Bolt
our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.
1. This NJMKT Anti-theft Anchor Bolt(Anchoring Systems) is anti-theft,high strength, easy to install.
2. Convenient replacement.
Specification
Anchor Bolt Manufacturer:NJMKT company can provide product design and customized specification according to customer’s requirement.
Installation guide
During installation, drill the hole to proper depth and diameter per specifications using ordinary impact drill. Enlarge the hole using a special tool. Embed this anchor, calibrate the embedment depth, tighten the foundation anchor plate and the cone head causes the bolt to lift, then push the blade to the wall of cone hole until the hole wall, blade and expansion head fit together. Then tighten the auxiliary nut to finish the installation. Screw the adjusting nut onto the bolt, then place ATM equipment foundation to the bolt and adjust the horizontal level. Screw the fixed special nut to finish the installation.
During removing this anchor, please loosen and disassemble the nuts, remove the foundation anchor plate, then hammer the bolt slightly and lift by a special tool to take out the bolt to finish the removal.
After-sales service
We provide free service including customized product design, on-site technical guidance and support for installation and removal.
Important announcement: This is NJMKT company independent research patent and we have already been approved and issued "patent certificate" by the State Intellectual Property Office. It must not be copied, reproduced, transmitted or disclosed without the prior written permission or authorization of NJMKT.
Foundation Anchor Bolt Standard Specification
Item |
M12 |
M16 |
M20 |
M24 |
Diameter of drilled hole |
φ22mm |
φ28mm |
φ35mm |
φ38mm |
Effective embedment depth |
80-150mm |
80-150mm |
80-150mm |
80-150mm |
Tensile strength |
67.4KN |
125KN |
196KN |
282KN |
More information:
http://www.autoaccessoriessite.com
Payment Terms: | T/T, L/C |
---|---|
Nanjing Mankate Science & Technology Co., Ltd. | |
---|---|
Country/Region: | Jiang Su - China |
Business Nature: | Manufacturer |
Phone: | 02586651110 |
Contact: | Amanda Huang (sales manager) |
Last Online: | 30 Nov, 2019 |