Epoxy Resin Injection System

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

Main Components: Modified epoxy resin, nanomaterials, other additives

Component A: Component B = 2:1

Main Components: Modified epoxy resin, nanomaterials, other additives

Component A: Component B = 2:1

Epoxy Resin Injection System Manufacturer:Nanjing Mankate Science & Technology Co., Ltd.

Features:

Two-component anchoring adhesive, fast-cure, epoxy-based anchoring adhesive, nearly odorless, non-toxic, no drip, no sag, and easy clean up

Quick load-bearing after cure, high initial bonding strength and anti-pulling capacity

Strong anchorage bonding strength achieves the effect of embedded parts

Higher strength than the concrete around it after cure

Compared with other mechanical or chemical anchor, it has a larger load-bearing capacity

There is almost no shrinkage during curing process

No expansion stress, provide the best spacing and edge distance

Good resistance to weather, high temperature, age, chemical corrosion, welding, seismic, flame, etc.

Fast and easy dispensing by special double spiral mixing nozzle to ensure accurate mixing proportion

When properly mixed, adhesive will be an even color to injection for use