Concrete Formwork Galvanized Cast Iron Tie Nut Anchor Nut Wing Nut

Product Introduction:

Casted wing nut together with steel tie rods as a whole facility are used widely in formwork construction. There are single wing nut, butterfly wing nut, two anchor wing nut, three anchor wing nut, combination wing nut. 

Because of this structure, wing nuts can be easily tightened and loosened by hand without any tools. Both the casting and forging wing nuts are available as requirements. 

Concrete Formwork Galvanized Cast Iron Tie Nut Anchor Nut Wing Nut

As formwork accessories, various wing nuts are used frequently in concrete construction.

Here are some popular wing nuts for your reference in the table.

Formwork wing nuts include wing nuts without round plates and wing nuts with round plates.

If by using wing nut without round plate, waler plate/washer plate is applied for your concrete pour shuttering system

Formwork wing nut with round plate is also called concrete anchor nut. According to the anchor nut wings, there are two wing anchor nut, three wing anchor nut for your concrete formwork tie rod construction.

Based on the round plate diameters, you can find different anchor nuts with plate size D60mm, D70mm, D80mm, D90mm,D100mm, D110mm, D120mm, etc. If you have any other special shapes or dimesions of anchor nuts, no problem. We Trico would like to make the mould according to your detail requirement. 

Sample

Free sample is available

Packaging

In woven bag or on pallet or done as demands