Description

It is used for measuring handrail belt, steps and pallets speed,start and brake acceleration,stopping distance ,as well as handrail belts and step/pedal speed synchronization rate of escalators and moving walks. It can also test the escalator/moving walks handrail belt deviation protection function and overspeed and anti-reversal protection function.

 

Functions

•  Measuring the speed of two handrail belts and steps/pallets at the same time.

• Test the speed deviation protection function of handrails of the escalator/moving walks.

l Test overspeed protection and anti-reversal protection function of escalator and moving walks.

l  According to the speed data of the handrail belts of both sides and pallets of escalators/moving walks, 7-inch intelligent terminal automatically calculate the synchronization rate and speed deviation, braking deceleration, average speed, stopping distance, overspeed protection response time,Anti - reversal protection action response time etc.

• Wireless data transmission is adopted between the intelligent terminal and the main control box.

l Setting parameters on colour touch screen. automatically display test results, easy to operate.

• Two trigger mode selection
• Running direction correction function

l On-site Bluetooth printing function

Parameters

Speed range: 0.2-9.99 m/s (1-9999 rpm)

Speed accuracy: 1%

Speed resolution: 0.001m/s (1 rpm)

Overspeed protection speed range: 0～9.99m/s

Unintentional reversal protection speed range: 0～9.99m/s

Display: 7 inch colour touch screen,Hand input.

Operation System: Wince 6.0, Support SD Card

Battery: DC 12V Built-in lithium battery

Driver power: 11kW

Driver power supply: AC 380V 

Operation temperature: -10-50℃

Operating humidity: ≤95%RH

 

Configuration 

Intelligent digital terminal  1pcs ,

Speed sensors 3 sets (Handrail belts speed sensor with fixture,non-sucker)

Data collector 1pcs ,

Antennas 2pcs,

Data cable 1pcs

Driver 1pcs