Wired system conventional fire alarm control system

 

Description:

The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. 

The panel can be wall mounted and the generously sized metal back box allows ample space for rear or top cable entries. 

A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization, photoelectric, photoelectric-thermal and heat detectors. 

Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors, interface devices and the ancillary components are all fully compatible with one another and that the full range of system functionality is supported by each device.

 

Features:

 4, 8,16 Class B Initiating Device Circuits (IDCs).

 Four Class B NotificationAppliance Circuits (NACs).

 One Form-A Alarm Relay.

 One Form-A Fault Relay.

 One Form-A Supervisory Relay.

 3.0 amps of system power.

 Max 30 conventional detectors in one zone.

 Auto/Manual mode setting enable. 

 Each Zone can be disabled.

 Sound output can be disabled.

 Manual active sound output enabled.

 Able to report short and broken circuit of detection zones.                         

Designed with standby batteries and spaceprovision for two sealed lead-acid batteries.

 Evacuate,Testing and disable functions.

 Remote reset and silence alarm functions.

 

Pictures:

 

Parameters:

Product Name	Wired system conventional fire alarm control system
Model No.	AS-BFP Series
Type	Conventional
Main Power Supply	90 to 270VAC, 50Hz
Ambient Temperature	Operating -10℃~+55℃
Ambient Humidity	≤95% , no condensation
Power Supply Rating	3 Amps @ 24VDC
Backup Battery	2 pcs lead acid battery
Initiating Device Circuits	4 - 16 detection zones
Notification Appliance Circuits	1 - 4 sounder lines
Maximum Detector Per Zone	25 - 30 detectors
Relay Contact Rating	2A & 30VAC, resistive
Standard	EN54-2 & EN54-4
Application	Office, factory, warehouse, apartment, hotel, bank, supermarket, shopping mall, school, hospital etc.

 

Related Models:

* AS-SD102: Conventional 2 wire smoke detector

* AS-SD202: Conventional smoke detector with relay output

* AS-HD105: Conventional heat detector

* AS-SHD109: Conventional smoke and heat detector

* AS-MCP-2D: Conventional manual call point

* AS-SSG-03: Conventional strobe sounder

* AS-BELL: Conventional alarm bell

* AS-E301-UV: Explosion proof ultrovialet flame detector

* AS-CRT: Conventional repeater panel

 

About Us:

ANSORL LTD is a building automatic control system and fire alarm system solution provider. Over the past years, We have always been dedicated to serving the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market, Ansorl continues to work hard to earn your trust and retain your confidence in our product line. 

We focuse on providing advanced buidling automatic control system and fire alarm / fire protection system. Ansorl works harder to tailor our solutions to meet your needs. 

Ansorl is an ISO 9001:2000 certified manufacturer with number of testing facilities. We are also planning to expand our manufacturing and testing facilities in China to ensure that our products and manufacturing practices continue to meet the highest standards. 

We invite you to get to know Ansorl better. Experience the best fire alam technology and solution. We are convinced that you will find Ansorl superior to any other detector company in China. You'll see it in our facilities, in our people, and in the products that Ansorl makes. It's our uncommon commitment to excellence and quality, and to the automation and productivity of our customers.

 

Product Lines:

* Conventional and Addressable fire control panel 

* Smoke, heat, gas, flame, beam detector 

* Manual call point and pull station 

* Audio/visual alarm, strobe horn 

* Standalone battery operated fire alarm detectors 

* Explosion-proof and weather-proof fire alarm devices 

* FM200/co2 gas extinguishing control system 

* Other fire safety products

 

Our Service:

* Prompt Response.

* Standard Quality Control System.

* Sample & Customized Order Can Be Supported.

* Independant R&D / Manufacturing / Customer Service / Marketing Dept.

* Direct Control On Materials, Production Status, Quality Checking.

* Fast Delivery Time for Standard Products.

* State-of-the-art Technology and Models.

* Waranty Guarrentee.

 

Welcome your inquiry !

Jean L.

we chat : ansorfire

sky pe: firesafety_18

Ansorl conventional fire detection control alarm panel

 

Description:

The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. 

The panel can be wall mounted and the generously sized metal back box allows ample space for rear or top cable entries. 

A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization, photoelectric, photoelectric-thermal and heat detectors. 

Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors, interface devices and the ancillary components are all fully compatible with one another and that the full range of system functionality is supported by each device.

 

Features:

 4, 8,16 Class B Initiating Device Circuits (IDCs).

 Four Class B NotificationAppliance Circuits (NACs).

 One Form-A Alarm Relay.

 One Form-A Fault Relay.

 One Form-A Supervisory Relay.

 3.0 amps of system power.

 Max 30 conventional detectors in one zone.

 Auto/Manual mode setting enable. 

 Each Zone can be disabled.

 Sound output can be disabled.

 Manual active sound output enabled.

 Able to report short and broken circuit of detection zones.                         

Designed with standby batteries and spaceprovision for two sealed lead-acid batteries.

 Evacuate,Testing and disable functions.

 Remote reset and silence alarm functions.

 

Pictures:

 

Parameters:

Product Name	Ansorl conventional fire detection control alarm panel
Model No.	AS-BFP Series
Type	Conventional
Main Power Supply	90 to 270VAC, 50Hz
Ambient Temperature	Operating -10℃~+55℃
Ambient Humidity	≤95% , no condensation
Power Supply Rating	3 Amps @ 24VDC
Backup Battery	2 pcs lead acid battery
Initiating Device Circuits	4 - 16 detection zones
Notification Appliance Circuits	1 - 4 sounder lines
Maximum Detector Per Zone	25 - 30 detectors
Relay Contact Rating	2A & 30VAC, resistive
Standard	EN54-2 & EN54-4
Application	Office, factory, warehouse, apartment, hotel, bank, supermarket, shopping mall, school, hospital etc.

 

Related Models:

* AS-SD102: Conventional 2 wire smoke detector

* AS-SD202: Conventional smoke detector with relay output

* AS-HD105: Conventional heat detector

* AS-SHD109: Conventional smoke and heat detector

* AS-MCP-2D: Conventional manual call point

* AS-SSG-03: Conventional strobe sounder

* AS-BELL: Conventional alarm bell

* AS-E301-UV: Explosion proof ultrovialet flame detector

* AS-CRT: Conventional repeater panel

 

About Us:

ANSORL LTD is a building automatic control system and fire alarm system solution provider. Over the past years, We have always been dedicated to serving the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market, Ansorl continues to work hard to earn your trust and retain your confidence in our product line. 

We focuse on providing advanced buidling automatic control system and fire alarm / fire protection system. Ansorl works harder to tailor our solutions to meet your needs. 

Ansorl is an ISO 9001:2000 certified manufacturer with number of testing facilities. We are also planning to expand our manufacturing and testing facilities in China to ensure that our products and manufacturing practices continue to meet the highest standards. 

We invite you to get to know Ansorl better. Experience the best fire alam technology and solution. We are convinced that you will find Ansorl superior to any other detector company in China. You'll see it in our facilities, in our people, and in the products that Ansorl makes. It's our uncommon commitment to excellence and quality, and to the automation and productivity of our customers.

 

Product Lines:

* Conventional and Addressable fire control panel 

* Smoke, heat, gas, flame, beam detector 

* Manual call point and pull station 

* Audio/visual alarm, strobe horn 

* Standalone battery operated fire alarm detectors 

* Explosion-proof and weather-proof fire alarm devices 

* FM200/co2 gas extinguishing control system 

* Other fire safety products

 

Our Service:

* Prompt Response.

* Standard Quality Control System.

* Sample & Customized Order Can Be Supported.

* Independant R&D / Manufacturing / Customer Service / Marketing Dept.

* Direct Control On Materials, Production Status, Quality Checking.

* Fast Delivery Time for Standard Products.

* State-of-the-art Technology and Models.

* Waranty Guarrentee.

 

Welcome your inquiry !

Jean L.

we chat : ansorfire

sky pe: firesafety_18