This device is for HHO system and can be used to adjust the electrolytic current. For DIY or beginners, it can save a lot of trouble.

New high-quality regulator. Special promotions, if necessary, please directly shoot according to the size of the current used.

The circuit design technology is advanced, the imported high-power tube is industrial grade, with low heat generation, high efficiency, high torque, and current adjustment range of 3% -99% stepless adjustment.

Compared with similar products, it has the following characteristics:

1.Using unique imported super high power tube, less heat, more torque and more stable performance

2. Increase the switching function. When it is adjusted to the minimum, the output will be turned off and turned off.

3. Wide voltage input 9-60V, high current design foot 15, 20, 40A.

4. Linear adjustment, convenient and reliable.

Technical index:

(1) Working voltage: DC10V-DC50V, wide working voltage range

(2) Control power: 0.01-2000W (maximum rated current 40A) Different working voltages correspond to different control power as follows;

         12V * 40A = 480W at 12V

         24V * 40A = 960W at 24V

         When working voltage 36V 36V * 40A = 1440W

         40V * 40A = 1600W at 40V

         50V * 40A = 2000W at 50V

(3) Quiescent current: 0.025A (When the working voltage is between DC10V and DC50V, the static current will not exceed 25ma)

(4) PWM duty cycle: 5% -100%

(5) PWM frequency: 12khz

(6) Operating temperature: -20-40 (ambient temperature: -20 ° C to + 40 ° C) This governor is of industrial grade quality and can work stably in environments below zero. General commercial-grade governors It cannot work stably below zero.