Liquid heater temperature control box

This product is used in oven, baking room, room temperature, heating furnace, bucket (large water heater), oil burning boiler, heating temperature control by using a relatively large range of work series

Operating principle: automatic start and stop to achieve constant temperature

Control mode: after setting the temperature automatic start and stop (below the set automatically start heating, higher than the set temperature automatically stop heating) (can be set back to the temperature control. Motor control, motor control, start and stop action frequently. With the return differential temperature control can achieve the start and stop action is not so frequent

Output control: high power output is the use of AC contactor control output.

Such as the use of the mold on the use of solid state (SSR) control output

Features: easy installation, compact structure, generous and beautiful.

Installation: can be hung on the wall machine wall. Wiring: the inside of the lines are connected to the good, the parents just need to wire in the wire from the power line and the load (that is, the heater equipment) can be used to connect the line.

Input voltage: 220V single phase 50HZ

380V three-phase four wire 50HZ

Degree K precision 2 temperature 0-399

Output control AC contactor control output.

Solid state (SSR) control output.