SafGuard Snap Tester，Button Pull Tester

Model:	TN11298-B
Brand:	TONNY
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Test Bench
Label:	SafGuard Snap Tester , Button Pull Tester , Fastener Pull Test
Price:	US $1300 / set
Min. Order:	1 set

Inquire Now

Product Description

TN11298-B SafGuard Snap Tester

INTRODUCTION

1.To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a stand.

The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.Capability can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars,and D-Rings,amongst others.
2.The detachment of a snap or other parts may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipments may be recommended, such as :
TN2008 Sharp Point Tester
TN2018 Sharp Edge Tester
TN11308 Button Impact Tester

TECHNICAL PARAMETERS

1.TONNY Dimension : 28×23×73 cm
2.Gross weight : 30 kg

STANDARDS

GB 6675,16 CFR 1500,ASTM D7142-2,ASTM F963,EN 71 Part1,CPSC,ISO 8124,M&S P115A,etc
ORDERING INFOMATION

Code No.	Description	Configured☑ / Optional□	Photo
11298-B-1	The Base : used to install the tension gauge, fixture and fixed sample and test operation.	☑
TN2418	30 kg Imada Force Gauge FB-30K : display the reading of pulling force.	☑
11298-2	Calibration Weight(15 LB) : routine checking the accuracy of Imada Force Gauge.	☑
11298-B-3	Lower Fabric Clamp,Level Arm Locking : fix the fabric specimen with buttons firmly,flatly & constantly so that the fabric slippage can be minimized.	☑
TN2408-2	Upper Long Nose Vise Grip: mainly used for trouser hooks and other smaller accessories.	☑
TN2408-6	Upper Three Pronged Grip : can adjust Jaw size, suitable for different sizes of buttons decorations. Generally used for testing four-hole buttons & jeans.	□
TN2408-11	Upper Grasp Button Grip : designed to grip the grasp button or larger buttons,e.g. Jeans button or plastic buttons up to 30 ligne.	☑
TN2408-7	Upper Snap Grip : testing concave buttons with five claws.	☑
TN2408-8	Upper Stud Grip : testing the convex button with five claws.	☑
TN2078-B	Transparent Small Parts Cylinder : to test whether the garment accessories are classified “Small Part” or not in accordance with EN 71,CPSC,ASTM F963 ,ISO 8124 etc.	☑
TN2408-5	Upper Two Pronged Grip : can adjust Jaw size, suitable for different sizes of buttons decorations.	□
TN2408-1	Seam Tension Grip : testing the seam `s pulling force.	□
TN11298-4	Zipper Test Kit : to test for the zipper stops & D-rings.	□

Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc

NEW TOTAL SOLUTIONS