Trench mesh reinforcement for footing slab construction and Waffle rafts beam an (China Manufacturer) - Wire Mesh

Trench mesh reinforcement for footing slab construction and Waffle rafts beam an

Model:	-
Brand:	-
Origin:	Made In Chile
Category:	Metallurgy , Mining & Energy / Metallurgy & Mining / Wire Mesh
Label:	reinforcing mesh , steel mesh , wire mesh
Price:	-
Min. Order:	-

Inquire Now

Product Description

Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers

Mesh For Footing Slab

Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire

It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam.

Specification of trench mesh reinforcement

Surface treatment:galvanized or drawn wire

Material: R250N, D500N, D500L, D300E, D500E

The Tensile strength is 300Mpa.

The trench mesh was produced by standard AS NZS 4671-2001

Width: 0.2m - 2.3m

Length: 6m

REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH
Code	STD UNIT	LONGITUDINAL WIRES	CROSS WIRES	MASS / KG
L8TM200	6 Metre	3 x 7.60 @ 100	4.00 @ 300	6.8
L8TM300	6 Metre	4 x 7.60 @ 100	4.00 @ 300	9.2
L8TM400	6 Metre	5 x 7.60 @ 100	4.00 @ 300	11.6
L8TM500	6 Metre	6 x 7.60 @ 100	4.00 @ 300	13.9
L8TM600	6 Metre	3 x 7.60 @ 100	4.00 @ 300	15.9
L8TM2400	6 Metre	25 x 7.60 @ 100	4.00 @ 300	72
L11TM200	6 Metre	3 x 10.70 @ 100	4.77 @ 300	13
L11TM300	6 Metre	4 x 10.70 @ 100	4.77 @ 300	17.7
L11TM400	6 Metre	5 x 10.70 @ 100	4.77 @ 300	22.3
L11TM500	6 Metre	6 x 10.70 @ 100	4.77 @ 300	26.8
L11TM600	6 Metre	7 x 10.70 @ 100	4.77 @ 300	34
L11TM2300	6 Metre	24 x 10.70 @ 100	4.77 @ 300	107.1
L12TM200	6 Metre	3 X 11.90 @ 100	4.77 @ 300	16.3
L12TM300	6 Metre	4 X 11.90 @ 100	4.77 @ 300	21.8
L12TM400	6 Metre	5 X 11.90 @ 100	4.77 @ 300	27.3
L12TM500	6 Metre	6 X 11.90 @ 100	4.77 @ 300	32.8
L12TM600	6 Metre	7 X 11.90 @ 100	4.77 @ 300	38.1

And Alls of using is accordance to AS NZS 2870-2011.

1. Footing slap

The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments.

The New Zealand Standard Reinforcement Mesh is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different.

2. Waffle rafts beam and piers

The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft:

(a). pier to be located on the intersection of every third internal beam.

(b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.