Blasting media Brown Aluminum Oxide 

Brown Aluminum Oxide is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2000°C. Our BFA is made into different shapes and grit sizes ranging from macro to micro grits and powders. It is a tough, hard material with high strength, excellent wear and corrosion resistance and good thermal conductivity.

SiCheng BFA grains, powders are available in standard grit and powder sizes and they can also be made to individual specifications. Please see below for information about some of our fused aluminum oxide materials.

Technology

Main Physical Properties

Color	Brown
Moh’s hardness	≥9.0
Melting point	2250℃
The maximum temperature	1900℃
Specific gravity	3.95
Bulk density	1.53-1.99g/cm3
Real density	≥3.90g/cm3

 

Chemical Composition

	Grits	Fines	Grains	Micro powder
Al2O3	≥95%	≥92%	≥95%	≥92%
SiO2	≤1.5%	≤2%	≤1.5%	≤2%
Fe2O3	≤0.5%	≤0.55%	≤0.5%	≤2%
TiO2	≤3%	≤3.3%	≤3%	≤4%

 

Customized Sizes

Grits	0-1mm 1-3mm 3-5mm 5-8mm
Fines	200#-0 320/325-0
Grains	12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#
Powder	#240 #280 #320 #360 #400 #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500

 China fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheelChina fused alumina supplier Brown fused alumina for grinding wheel

Application

♦Brown Fused Alumina Used for refractory materials, castable refractory bricks, etc.

 

♦Brown fused alumina for sand blasting - BFA as abrasive,hardness is moderate, high bulk density, no free silica, large specific gravity, good toughness, is an ideal "environmental" type sand blasting material, widely used in aluminum profiles, copper profile glass, washed denim Precision molds and other fields

 

♦brown fused alumina for grinding grade abrasive—applied to picture tube, optical glass, monocrystalline silicon. Lens. watch glass.crystal glass.jade. etc.,

 

♦brown fused alumina for resin grinding —with suitable color.hardness. Toughness. particle cross-section type and edge retention.it is applied to resin abrasives with ideal effect;

Brown Aluminum oxide /brown fused alumina for abrasive belt

♦brown fused alumina for coated abrasives — sandpaper.gauze

Brown Aluminum oxide /brown fused alumina for abrasive belt

♦brown fused alumina for functional fillers— mainly used in automotive brakes. special tires. special construction products.etc.Brown Aluminum oxide /brown fused alumina for abrasive belt

can be used as a highway pavement. Aircraft runway. Terminal. Parking lot. Industrial floor. Sports ground and other wear-resistant materials;Brown Aluminum oxide /brown fused alumina for abrasive belt

♦brown fused alumina for Filter medium—It is a new application field of abrasive. use granular abrasive as the bottom medium of filter bed to purify drinking water or waste water. ;used for non-ferrous metal beneficiation: oil drilling mud weighting agentBrown Aluminum oxide /brown fused alumina for abrasive beltBrown Aluminum oxide /brown fused alumina for abrasive belt

♦brown fused alumina for Hydraulic cutting—It is a cutting medium, It relies on high-pressure hydraulic jet for basic cutting. It is applied to the cutting of petroleum (natural gas) pipelines, steel and other components. It is a new, environmentally friendly and safe cutting method.

 China fused 

FAQ

1. Q: How to place an order?

    A: Send the inquiry  --- Get the quotation --- Approve the order --- Make the PI --- Payment --- Arrange production & inform --- Rest and relax --- Finished products inspection --- Make the balance --- Arrange delivery --- Goods received.

2. Q: What kind of payment do you accept?

    A: Formal order we usually choose TT or  L/C, Western Union,Paypal for small amount payment.

3. Q: Do you offer OEM service?

    A: Yes, Oem is ok, our factory can offer produdcts that according to our clients' requirments.

4. Q: How long is the delivery?

    A: Usually 3-5 days for small order, 10-20 days for bulk order after payment received.

 

Contact us

r grinding whee

l