Galvanized Steel Sheet Floor Decking Panel Roll Forming Machine

 

Roll forming machine for production floor deck & building material.

 

Metal Forming machine for steel floor deck technology detail

 

1,Technical parameters (Item:YX75-310-914.5)

 

No.	ITEM		PARAMETER	REMARK
1	MATERIAL	Type	Cold-rolled strip steel, galvanized sheet
		T.(mm)	0.6-1.8mm
		Yield Strength (Mpa)	Q235
2	Forming product   Width		310-914.5mm
3	Forming speed   (m/min)		2-8m	Including hole
4	(KW)		18 KW	FYR
5	Hydraulic power   (KW)		18.5 KW	FYR
6	Collect Rack		6m	FYR
7	Voltage		AC380V，50Hz，3P	Customized

 

Floor Deck line process

Uncoiler →Guide device → roll forming machine →shear device (including knife)→ finished product rack

 

Guide device

 

Construction metal floor deck roll forming machines  

3.1  Forming Roller：20 stations，and add Rub-roll, To make sure the surface profile no scratches.

3.2  Side Panel：T.18mm ,A3 steel   Heavy duty 。

3.3  Rolling speeding: 2-8 m/min。

3.4  Roller material：GCr15，overall quenching, hardness HRC56-62 ℃. 
3.5  Motor power：7.5KW。    
3.6  Main Roller ：￠75mm，45 #。
3.7  Equipment base: 45 # H type using welded steel plate.
3.8  Transmission: chain drive.
3.9 Security: across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operator safety. And other gear in the chain and the staff could easily lead to injury transmission section covered with protective cover, to ensure the safety of workers.

 

 

Model: YX-75-310-914.5

Floor deck roll former for mass production construstion material foor deck.

Floor deck name as floor board, also known as profiled steel plate, steel plate, steel floor plate. It was first called the profiled steel plate, which is the collective name for all the steel plates pressed by the plate press.

The floor slab is made of galvanized steel sheet by roll forming, and its cross section is V-shaped, U-shaped, trapezoidal or similar. It is mainly used as a permanent template and can also be selected for other purposes.

The earliest profiled steel plates were mainly used for roof slabs on the factory floor, and later there were profiled steel plates for the floors, which were gradually classified as floor deck.

The equipment for producing floor deck machinery name as floor deck roll forming machine & floor deck sheet machine & steel floor deck roll forming line.