Solar Mounting bracket roll forming machine production line

Roll forming machine for production solar bracket named as solar pv bracket, solar photovoltaic bracket.

 

Roll forming machine for solar mounting bracket

 

1,Technical parameters 

 

No.	ITEM		PARAMETER	REMARK
1	MATERIAL	Type	Cold-rolled strip steel, galvanized sheet
		T.(mm)	5.0mm
		Yield Strength (Mpa)	Q235-300
2	Forming product   Width		50mm
3	Forming speed   (m/min)		10-18m
4	Forming main power   (KW)		45 KW	FYR
5	Hydraulic power   (KW)		18.5 KW	FYR
6	Voltage		AC380V，50Hz，3P

 

Solar bracket production line process

(A) 2 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device  → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack

 

Solar mounting bracket C channel roll forming machine for production different size solar pv support 

Main technical parameter:

quickly change the type of roll forming machine

  Raw material thickness:5.0mm 

Forming steps: 16 steps

  Roller material: bearing steel after hardening

  Roller bearing diameter : Φ140mm

  Bearing material: 45# steel (hardening and tempering)

  Bottom sheet: 36# H-section steel

  Main machine power: 45 KW

  Hydraulic pressure: 20 MPa

  Electronic control system: PLC computer control

  Hydraulic cutter material: Cr12

  Length error: ± 2mm

 

https://www.superdamc.com