wifi and bluetooth combine module ESP32 development board embedded gateway modul

Model:	WT32-ETH01
Brand:	Wireless-tag
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Components / Integrated Circuit
Label:	-
Price:	US $5.6 / pc
Min. Order:	100 pc

Inquire Now

Product Description

1. Overview
WT32-ETH01 is an embedded serial port to Ethernet module designed by Wireless-tag company based on ESP32 chipset, The module integrates the optimized TCP/IP protocol stack, which is convenient for users to complete the networking function of embedded devices , and greatly reduces the cost of development time. In addition, the module is compatible with the semi-welding disk and connector through hole design, the plate width is a general width, the module can be welded directly on the board, can also be used on the bread board, convenient for users to use in different scenarios.
ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption.
2. Main Features

Categories	Items	Specifications
Wi-Fi	RF certification	FCC/CE/RoHS
	Protocols	802.11 b/g/n/e/i (802.11n up to 150 Mbps)
	Protocols	A-MPDU and A-MSDU aggregation and0.4 _s guard interval support
	Frequency range	2.4~2.5 GHz
Bluetooth	Protocols	Bluetooth v4.2 BR/EDR and BLE specification
Bluetooth	Radio	NZIF receiver with -97 dBm sensitivity
Hardware	Network port specification	RJ45, 10/100Mbps, cross direct connection adaptive
	Serial port baud rate	80~5000000
	Onboard Flash	32Mbit
	Operating voltage	5V or 3.3V power supply (Any one of them)
	Operating current	Average: 80mA
	Minimum current delivered by power supply	500 mA
	Operating temperature range	-40°C~+85°C
	Ambient temperature range	Normal temperature
	Package	Semi-welded disc/ connector through-hole connection (optional)
Software	Wi-Fi model	Station/ softAP/ SoftAP+station/ P2P
	Wi-Fi security mechanism	WPA/ WPA2/ WPA2-Enterprise/ WPS
	Encryption type	AES/ RSA/ ECC/ SHA
	Firmware upgrade	Remote OTA upgrade over the network
	Software development	SDK for user Secondary Development
	Network Protocol	IPv4, TCP/UDP
	IP acquisition mode	Static IP, DHCP(default)
	Simple transmission mode	TCP Server/ TCP Client/ UDP Server/ UDP Client
	User configuration	AT+ command set