Construction of manual wire threading machine

Product Description：

Construction mesh welding machine technical parameters:

1. The diameter of weldable reinforcement is 3mm~5mm

2. The width and length of the mesh can reach 3.3 meters and 12 meters respectively.

3. Welding speed: 30-40 (platoon/min)

4. The transformer is air-cooled by the exhaust welder.

5. Manual placement of diameter wire, automatic shedding of weft wire.

6. Holes of different sizes can appear on the same web.

7. Adjustable diameter wire hole spacing, weft wire hole spacing input to the computer can reach the hole spacing you get.

8. Adopt synchronous numerical control, the welding time and sub-controlled welding are controlled by numerical control.

9. The welding machine has the characteristics of one time compression and separate control welding.

10. The shift can be divided into nine levels, expanding the range of welding wire diameter.

11. The welding power is electric, and the stepping motor hopper is adopted, the braking motor drives the trolley to send off, and the stepping motor drives the trolley to pull the net.

12. Both warp and weft wires are pre-straightened and cut off by straightening machine.

The welded wire mesh machine manufacturer After-sales service:

1.The warranty period of the whole machine is 12 months, and the maintenance of equipment procedures shall not include vulnerable parts (welding electrodes and joints, etc.) and man-made damage.

2. If the customer's equipment fails, our company will give a clear answer within 24 hours after receiving the customer's call.

3. After the warranty period, our company will provide lifelong after-sales service support and provide equipment accessories at the original price of accessories.

As a automatic welded wire mesh fence machine, fence panel welding machine manufacturer, we can provide quality products and perfect after-sales service.