Sxl-9100pur hot melt adhesive

 

Product Name: xsxl-9100 pur hot melt adhesive

 

Model: xsxl-9100

 

Package specification: 30g / piece (in syringe, outer vacuum package)

 

Color: transparent

 

purpose

 

Xsxl-9100 is mainly used in mobile phones. The bonding plastic of flat TP and frame is easy to remove, and the bonding and mutual bonding of glass composite.

 

Product characteristics

 

Reactive hot-melt adhesive is heated and melted into a fluid under the condition of inhibiting chemical reaction, so as to facilitate coating; the adhesive layer agglomerates after two kinds of adherends are bonded and cooled; after that, with the help of moisture existing in the air and moisture attached to the surface of the adherend, it reacts with and expands the chain, forming a polymer with high cohesion, making adhesion, heat resistance, low temperature resistance, etc. obvious To improve. Because of its high reactivity, it shows excellent adhesion to a variety of plastic materials. It is applied to the bonding of plastic substrates in electronic and microelectronic industries.

 

Main technical indicators

 

Appearance: transparent

 

Opening time (120 ℃) (seconds): 120-240

 

Specific gravity (g / cm3): 1.15

 

Viscosity (120 ℃) (CPS): 3500-7000

 

Sizing temperature (℃): 110 ℃ - 120 ℃

 

Temperature resistance after curing (℃): - 40 ℃ ~ 130 ℃

 

Solvent: solvent free use method

 

1. Heat and melt the pur hot-melt adhesive at 110 ℃ - 120 ℃, and apply the glue to the part to be bonded with a dispenser within 1-2 minutes

 

Fit. (the specific time depends on the ambient temperature and humidity.)

 

2. Please empty a short section of glue nozzle before use.

 

3、 It is recommended that the heating time should not exceed 4 hours in a row, and the same rubber tube should not be reheated for three times.

 

4. If the heating time is long, the back part of the rubber tube will be skinned. At this time, the skinning can be pierced to reduce the pressure of gluing.

 

Keep in storage

 

Pur glue should be stored in a dry and cool place. Avoid sun exposure, do not contact with steam, water and alcohol solvents.

 

surface treatment

 

Shenzhen xinsenxinli Technology Co., Ltd. provides a series of surface treatment products to ensure the maximum performance of adhesives and sealants. Accelerators increase the curing speed and filling ability of cyanoacrylate; activators are curing agents specially designed for structural adhesives; primers ensure that they can cure on inactive surfaces and accelerate the curing of mechanical adhesives.

 

Metal forming

 

Shenzhen xinsenxinli Technology Co., Ltd. provides products with the best performance by using various processes used by home appliance manufacturers to press, punch, bend or pierce metal plates. It is very important to choose proper lubricant for reliable production without surface crack or scratch. Shenzhen xinsenxinli Technology Co., Ltd. provides a series of synthetic and oil-based high-performance metal stamping lubricants.

 

Industrial cleaning

 

Thorough cleaning and degreasing of metal parts ready for pretreatment, galvanizing, coating and glazing is necessary. To this end, Shenzhen xinsenxinli Technology Co., Ltd. provides a series of products, as well as cleaning agents for glass and plastic.

 

Pretreatment

 

Shenzhen xinsenxinli Technology Co., Ltd. has a series of zinc phosphate and iron phosphate products, which can convert metal surface into inorganic adhesive surface by chemical means. The process improves the adhesion of coating, reduces the reaction between metal and coating, and enhances the corrosion resistance and overall durability.

 

Bonding

 

From motor magnet and stove surface bracket to door handle and control panel knob, Shenzhen xinsenxinli Technology Co., Ltd. provides a series of adhesives for metal and plastic bonding. Each adhesive provides reliable strength in the application environment. The gasket material of Shenzhen xinsenxinli Technology Co., Ltd. forms an impermeable layer, which can prevent the leakage of liquid or gas. The potting and packaging compounds of Shenzhen xinsenxinli Technology Co., Ltd. can protect electrical components from the effects of chemicals, moisture, thermal shock, mechanical shock and vibration.

 

 

Seal up

 

Shenzhen xinsenxinli Technology Co., Ltd. has won the industrial Award for its high-quality sound absorption and damping products. In terms of appliance design, customers can rely on their excellent control of sound and vibration management.

 

Business improvement plan

 

Chemical systems management of Shenzhen xinsenxinli Technology Co., Ltd. can help customers reduce the use rate of chemicals and

 

Reduce overall costs while improving delivery systems and reducing paperwork. The unit cost (CPU) program fixes customer costs to every process from metal forming to packaging. In addition, at each stage of the production process, the disassembly analysis of Shenzhen xinsenxinli Technology Co., Ltd. can formulate a series of cost reduction measures.

 

New product development industry standard

 

The focus of Shenzhen xinsenxinli Technology Co., Ltd. on improving customer profitability has led to a variety of innovations, including the creation and improvement of faster curing products

 

Anti vibration and sound insulation solutions. In response to environmental constraints by banning phosphates in the manufacturing process, Shenzhen xinsenxinli Technology Co., Ltd. developed the bonderite series

 

No phosphate products, this product conforms to environmental protection standards, and can achieve safe and reliable bonding.

 

Fasteners to be used in the future

 

Shenzhen xinsenxinli Technology Co., Ltd. can replace many traditional fasteners with multi-functional and reliable substitute products, which makes the previous difficult or limited cost design possible. The company's proprietary liquid thread locking agent has high performance in almost any application. Shenzhen xinsenxinli Technology Co., Ltd. has also developed the first semi-solid chemical thread locking product. These portable rod products have liquid