Product introduction of Danfoss AKS38-DN25 (148H3204) liquid level control valve

AKS 38 float level switch is an electromechanical float level switch. It can send switching signals according to the change of liquid level. AKS38 float level switch has simple design, superior performance, reliable application and long service life. AKS 38 can be used to control the liquid level and can also be used as a high / low level alarm.

Flange switch boxes in the form of DIN, ANSI and FPT / NPT can be provided above the float chamber, which can be installed at any angle, easy wiring
Liquid level control backlash can be adjusted
Electromagnetic microelectronic switch, mechanical trigger
The entire switch box can be replaced without affecting the operation of the refrigeration system
The switch box has a DIN standard junction box, which is easy to install and maintain
Including welded flange

The refrigerant

Applicable to various non-flammable refrigerants including ammonia and non-corrosive gases and liquids, but pay attention to the use of corresponding sealing materials
Flammable hydrocarbons are not recommended
■ Temperature range
-50 ℃ / + 65 ℃
■ Pressure range
Maximum working pressure: 28 bar g
■ Material
-Float room: cast iron, GGG40.3, EN-JGS-400-18-LT
-Float ball bolt: stainless steel (A2-70 / ASTM A-276)
-Flange: P285QH, AISI3004, A276
-Flange gasket: fiber, non-asbestos gasket
-Guide tube: X5CrNi18-10, AISI304, A276
-O-ring: neoprene
-Gasket (between guide tube and float chamber): Aluminum
-Electrical switch box: Anti-vibration polycarbonate CT-661-T