• This glass beads is one composition of road marking paint, according to the standard of BS6088-A and BS6088-B, AASHTO M247 TYPE I and AASHTO M247 TYPE  II, EN 1423 AND EN 1424, AS2009 B3.2, Korea KS, Except of the Chinese standard.
•  
• Reflective glass beads is the essential material for the coating of road marking, it is mainly used for road marking. The glass beads for road marking can improve the retro-reflective performance of road surface coating and increase the safety for night driving. When driving at night, the lamp shines on the marking line with glass beads in it, the ray of lamp is reflected back parallel. So the driver can look at the road clearly and drive safely at night.
•  
• Coated glass beads are the glass beads which were coated with silane or silicon oil on their surface, thus the performance better than before in quality.
•  
• 1>    After the coating processing, the phenomenon of adsorbing dust in the air on the surface of glass beads is lessened;
• 2>    Can prevent sinking of micro beads to the depositing of paints.
• 3>    Coating film glass microsphere has hydrophobic and floating and flow ability character.
•  
• In a word, it is damp proof, light protective and applicable to use in the districts where it abound with rain, fog and damp.

Standard:BS6088A/B,EN1423/1424,AASHTO TYPE I/II,AS2009B/C/D

Products features: high degree of roundness, extraordinary clarity, smooth surface, high reflective index, high hardness, stable physical and chemical properties, no pollution and economical cost.

Main physical index of glass bead

1.Appearance: round, clear, and free from obvious bulbs or impurities

2.Density: 2.4-2.6 g/cm³

3.Roundness:≥80%

4.Refractive index:≥1.5

5.Hardness: Moh's 6-8

Main chemical indexes of glass bead

1. SiO₂:68-73%

2. Al₂O₃:1-2.5%

3. CaO：6-10%

4. MgO：3-5%

5. Na₂O：13-15%

6. Fe₂O₃：<0.08%