Bitzer Compressor Crankcase Heater

 

Picture of Crankcase Heater

• Two core heater ( width is 14mm )
• Four core heater ( width is 20mm,25mm )

 

Description of Compressor Parts Crankcase Heater

 

Working environment temperature of designed air-conditioner compressor is about 4℃ while surround environment temperature is bellow zero.Air-conditioner is hard to make heater is necessarily used at end of central air-conditioner to make the supplementary heat.Our subsidiary electric heater series are the most suitable and ideal heating source designed and manufactured for this application.Moreover,our subsidiary heater series do not need any other subsidiary equipment.They have such many obvious advantages as being easy in installing,safe in operating and PTCelectric heating element.

 

 

Function and Introduction of Air-conditioning Compressor Crankcase Heater

 

1.When the air-conditioner is used under severe cold condition,drive engine oil inside can condense,and affect the normal starting of the unit.The heating belt can promote to thermalize engine oil,and help the unit to be started normally.

2.It can protect compressor from being damaged in starting in cold winter,and prolongs the service life.(In cold winter,engine oil condenses,hard friction can generate in starting,and may cause damages of the compressor.)

 

Customized Design and Options

Heating wire	NiCr or Cu-Ni Alloy	Max.Surface Temperature	200℃
Tail End of Heating Body	Seal Tail End of Colloidal Silica	Min.Surface Temperature	-60℃
Withstand Voltage	AC2500V/min	Volatge	110-230V
Insulation Resistance	≥200MN	Shape	14,20,25,30mm
1.The width of 2-core heating belt is 14mm,and the max power is 100W/M 2.The width of 4-core heating belt is 20mm,25mm,30mm,and the max power is 150W/M.

 

Application of Crankcase Heating belt

Applied insertion to rated voltage bellow 450V,50-60Hz,related humidity≤90%,diffuse heat after conducting at electricity in an environment temperature of -30℃-+50℃.It is generally used in central air conditioner compressor.It is also applied in cold area,and oil tube.

 

Characteristics of Compressor Heating belt

• Random bending and winding according to the demand of to be heated component,small occupied space and volume.
• Simple and fast installation mode
• Sleeve silicon rubber insulator on heating body.
• Tin copper braided layer can prevent machine from being damaged,and conduct electric power to the ground.
• Moisture resistance entirely.
• Customize according to the required length.
• Core cold tail end.

Technical Parameter

1. Continous Max Use Temperature:250℃;Min Ambient Temperature:40℃ below zero
2. Max Surface Power Density:2W/cm²
3. Min Making Thickness:0.5mm
4. Max Use Voltage:600V
5. Power Precision Range:±5%

 

REMARK: The products will be 100-percent inspection when the product is finished.

 

 Pls advise below details when inquire

 

(1). Type of Heater     (2). Wattage and Voltage     (3). Dimension of the heater Belt

(4). Drawing required for special configuration   (5). Working environment

 

 As a trustworthy manufacturer, we can assure you for:

 

(1)Consistent & Uniform quality of products throughout the Merchandise.

(2)Shipments well within the time agreed between us.

(3) Most competitive prices and assuring our products quality.

 

 Our Belief:

 

(1)Beno company is a professional Chinese heating element manufacture.

(2)Our focus is on quality control, making excellent before and after sales service and enlarging product series to meet clients' requirements.

(3)Welcome to contact with us ,we are always free to answer your questions.

(4)We sincere hope to set up good business relationships with you to create a bright future!

 

 Remark:   We can send the sample for free. and you can test our quality.