If you are looking for a solution to sliding, impact, or abrasive wear damage,look to our tungsten carbide chips.It is unique answer to the wear challenges in underground mining, surface mining, material crushing, tunneling, and road construction.
Tungsten carbide chips:
1, lasts up to 6x longer than standard sttel wear solutions.
2, resists wear before it starts, which means less downtime and maintenance costs.
3, is our specially formulated cemented carbide chips.
Application:
1, Use small carbide chips when proxessing fine-grained abrasives like sand.
2, Small carbide chips fit closely together and prevent fine-grain abrasives from wear away the steel matrix between the chips.
3,Use large carbide chips for processing large-grained abrasive like asphalt.
We'll help you determine the right grain sizes for your application.
Stock sizes:
| 5 x 8 # |
3 x 5 mm |
| 8 x 14 # |
2.36 x 1.4 mm |
| 10 x 16 # |
2.0 x 1.18 mm |
| 12 x 16 # |
1.7 x 1.18 mm |
| 12 x 20 # |
1.7 x 0.85 mm |
| 12 x 30 # |
1.7 x 0.65 mm |
| 14 x 20 # |
1.4 x 0.85 mm |
| 16 x 20 # |
1.18 x 0.85 mm |
| 20 x 30 # |
0.86 x 0.6 mm |
| 30 x 45 # |
0.6 x 0.35 mm |
| 40 x 60 # |
0.43 x 0.25 mm |
| 60 x 100 # |
0.25 x 0.15 mm |
OTHER SIZES ARE ON REQUEST.
CHEMICAL COMPOSITION:
| Parameter: |
Average Grade |
Higher Grade |
| CARBON: TOTAL |
5.50 - 5.85% |
5.50 - 5.85% |
| CARBON: FREE |
0.03 - 0.15% |
0.03-0.05% |
| COBALT: |
5.50 - 10.00% |
6.00-8.00% |
| TIC/TAC/VC |
0.50% MAX |
0.10% |
| IRON: FREE |
1.50% MAX |
0.50% |
| TUNGSTEN: |
BALANCE |
BALANCE |
| DENSITY: |
13.80 - 14.70g/cm3 |
14.50-14.90g/cm3 |
| HARDNESS: |
88 - 92 HRA |
89 - 92 HRA |
Free Samples and catalogs are available at any time if you are interested in our tungsten carbide granules.
