1.Introduction

The IDO-SOM6Y08 is a tiny insert-ready System on Module populated with the   NXP® Semiconductor i.MX 6ULL SoC based on the ARM Cortex-A7 architecture. The module has integrated with DDR3L, Nand Flash(or eMMC ) and one 10/100M Ethernet PHY on board. It delivers high performance with ultra-efficient power that targets Industry Control, HMI, Smart Healthcare and Internet of Things (IoT) smart gateway.

The i.MX 6ULL is a power efficient and  cost-optimized applications  processor  family featuring an advanced implementation of a single Arm® Cortex®-A7 core, which operates at speed up to 900 MHz. 

Main Features: 

  Arm Cortex-A7 core up to 900 MHz, 128 KB L2 cache

  Parallel LCD Display up to WXGA (1366x768)

  8/10/16/24-bit Parallel Camera Sensor Interface

  2x MMC 4.5/SD 3.0/SDIO Port

  2x USB 2.0 OTG, HS/FS, Device or Host with PHY

  Audio Interfaces include 3x I2S/SAI, S/PDIF Tx/Rx

  2x 10/100Mbps Ethernet with IEEE802.3

  UP to 8 UARTs

  2x 12-bit ADC, up to 10 input channel, with resistive touch controller (4-wire/5wire)

  Security Block: TRNG, Crypto Engine (AES with DPA, TDES/SHA/RSA), Secure Boot