2300*1000mm Polyurethane High Frequency Screen

Introduction

Polyurethane high frequency screen(Large Size)

Application

Mining plant , coal washing plant , quarry etc.

Advantages

1. Independent development and manufacturing.

2. Integral one-time casting，non-small connect process.

3. Inbuilt high strength cord.

4.Higher open mesh area.

5.Effectively prevent hole pl ing & screen jam.

6.Long life (＞6 months)

As a Mining High Frequency Screen Factory, share with you. According to the structure of polyurethane screen plate, it is divided into four types: inlaid bolt connection, pressure bar connection, screen hook connection.

For example, the bead connection type: please put the sieve plate on the sieve surface, and then install it according to the support beam structure of the sieve. Generally, on both sides of the screen machine, the upper layer of the sieve plate should be drilled with a U-shaped long iron plate with a suitable width along the cutting direction at a suitable distance, and then bolted to the bottom support beam to tighten the sieve plate. Fixed in the middle. The support beam and the contact surface of the long iron plate and the sieve plate are lined with rubber strips. Above the support beam in the middle of the sieve can also be installed in this way.