EPSON-DX5 DX7 XP600 TX800 R330/R290/T50/L801/L805/L800/L850/P50

TX650T60/A50/RX595/RX610/RX690Printer nozzle。

Pay Attention：

1.The head of the nozzle is very fragile, absolutely can not be broken, must protect. It was covered with a sheet of aluminum, and the inner layer was covered with Crystal oscillator and very fine ink tubes. A touch will concave, deformation, or even broken, so that the nozzle scrapped

2.Also be careful when installing showerheads. Be Sure to disconnect the power first and install it in place. After the installation, with the hand to push the cart around to move, test whether smooth, do not install on the power, because, if the head is not in place, the cart is easy to hit the head to break, and the hands feel, easy to put, controllable

3.When connecting the plug cable, do not take ink, and to ensure good contact with the socket, do not touch the foot, otherwise, it will cause a short circuit nozzle burn

Before the nozzle factory to do a variety of rigorous testing, there is no quality problem。