Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip

Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip
Model:DL-CC2340-B
Brand:DreamLNK
Origin:Made In China
Category:Electronics & Electricity / Electronic Components / Circuit Board
Label:Bluetooth Module , BLE Module , CC2340 RF Module
Price: -
Min. Order:200 pc

Product Description

Brief Introduction

DL-CC2340-A and DL-CC2340-B BLE modules are both designed base on TI's SimpleLink™ wireless series CC2340R5 Bluetooth® Low Energy Chip, which uses a 48-MHz Cortex-M0+ kernel, integrates up to 512 KB of flash memory, 36 KB of SRAM, and has up to 26 universal I/O interfaces. Moreover, these Bluetooth Low Energy modules are equipped with a built-in 48MHz 10PPM external high-speed clock, and 32.768Khz external low-speed clock.

The DL-CC2340-A BLE module can use a variety of universal peripherals for all I/O ports of the CC2340R5 chip, which includes UART, SPI, I2C, timer, temperature sensor, battery voltage detection, built-in analog comparator, and 12-bit ADC analog-to-digital converter. In addition, to meet the security requirements of Bluetooth, this BLE module also take security issues into consideration, it also has AES-128 encryption and RNG functions. Customers can use the SDK for secondary development, and embed its complete applications.

The DL-CC2340-B BLE module has a smaller size, but features AT command, which makes it suitable for use as an UART BLE module. The external MCU can be connected to the BLE module through the UART interface to achieve BLE datatransmission. In AT command mode, UART can be used to send commands to modify scan intervals, scan timeouts, connection intervals, broadcast intervals, broadcast custom data, baud rates, etc. The MCU can also send switching commands to the BLE Peripherals through UART, which has broadcast and connection status, and can be connected by the BLE Central, serving as a bridge between the BLE Central and MCU for data transmission.

In terms of RF performance, these CC2340 BLE modules integrate RF balun internally, with simplified RF design, and reduced power consumption. The typical sensitivity can reach as high as -96.5 dBm @ 1 Mbps, and they can also achieve an output power up to +8 dBm. In order to meet the limit standards for RF power in various countries, the power of the BLE modules can be adjusted (ranging from -21 dBm to+8 dBm).

Features

● Temperature: Working Temperature Range: -40~85ºC, suitable for various applications, even harsh environments

● Transmitting Power: Adjustable range of -21~+8 dBm, in compliant with limit standards for RF power in various countries

● Low Power Consumption: It has a low RX current of 5.3mA, and a standby current of less than 800nA, which can greatly increase the lifespan of the battery.

● Excellent Performance:

   -102dBm sensitivity (Bluetooth ® Low Energy 125 kbps)

   -96.5dBm sensitivity (Bluetooth ® Low Energy 1 Mbps)

Download Center

DL-CC2340-B Specification V1.0

 

Hardware Parameters
Model No. DL-CC2340-A / DL-CC2340-B
Dimension 26.5x18 mm / 18x12 mm
Chip Model TI CC2340R5
Development Method Secondary Development / AT Command
Module Pin QTY 40 PIN (25 GPIO) / 20 PIN (15 GPIO)
Antenna PCB antenna + IPEX / PCB antenna + external PAD
Working Voltage (DC) 1.75~3.8V
Working Temperature -40 ℃ ~ +85 ℃
Storage Temperature -40 ℃ ~ +85 ℃
Wireless Characteristics
Bluetooth Version Bluetooth 5.3 supported
Frequency Range 2402-2480 MHz (2.4G ISM radio band)

Modulation Mode 

GFSK
Transmission Power -21 dBm ~ +8 dBm (can be programed via software)
Receiving Sensitivity 96 dBm (typical value @ 1 Mbps)
Transparent Mode Central / Peripheral
Communication Range 70 meters (open area)

 

Power Consumption Parameters
Active-Mode RX 5.3 mA
Active-mode TX

5mA @ 0dB

12mA @ +8dBm

Sleep State

sleep state 0.7-µA avg (RTC running and RAM/CPU holding)
Running 2.6mA active mode
Data Transmission to be updated

 

Software Parameters
Supported Protocols

• Bluetooth® 5.3 Low Energy

• Zigbee® 1 

• SimpleLink™ TI 15.4-stack 1

OTA

available

Peripheral & Central

Peripheral & Central

 

Typical Applications:

Sports & Health: Activity Tracker, Pedometers, Sports Measurement (running, cycling, golf), etc.

Smart Home: Socket Improvement, Remote Control Switch, Smart Lighting, Smart Locks, Smart Curtains, Thermometer and Hygrometer, Smart Scale, Environmental Monitoring, Smart Detector, Pet Supervision, etc.

Health and Medical: Medical Detection/Tracking (heart rate, blood pressure, blood oxygen, pulse, body temperature), Blood Glucose Monitoring, Insulin Pump, Medical Sensor Patch

Infant Care: Real-time Temperature Detection, Smart Crib, Anti-lost

Toys: Interactive Remote-control Toys, Robots, Aircraft, Toy cars, Anti-lost devices

Vehicle Electronics: Tire Pressure Detection, Automatic Car Lock, Parking Record,Electric Vehicle Anti-theft Device, Data Collection and Monitoring

Automation: Beacons, Electronic Labels, Asset Management, Cold Chain Logistics, Industrial Control,Electronic Shelf Label, Electronic Sales Terminals

Smart Building: Building Security, HVAC, Lighting

Personal Care: Electric Toothbrush, Electric Shaver, Facial Cleanser

Games, Remote Control: Game Controllers, Voice Remote Control, Toys

Electronic Product: Keyboard/Mouse (non-USB type), Printer, Storage

 

Product Tags

RF module, Wireless Module, BLE Module, Wireless Transceiver Module, TI CC2340, CC2340R5, UART Module

Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip 1Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip 2Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip 3Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip 4Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip 5

Member Information

Shenzhen DreamLNK Technology Co., Ltd.
Country/Region:Guang Dong - China
Business Nature:Manufacturer
Phone:13760215716
Contact:James (Sales Manager)
Last Online:06 Nov, 2024