HuiJin using the Dry-fog Dust Suppression Technology,Using the ultrasonic produce a fine mist of water to capture and condense fine dust,to directly suppress the dust at the starting point of dust and avoid the fly-dust.The dust is effectively controlled with not significantly increases the moisture content in those material which the dust come from.

The technology principle

1 Collision and Aggregation

  Use pressure to mist water into tiny drops, the tiny drops become micro-mist around the dust producing area. Large amount of dust produced during operation will be wrapped in the water mist,the inelastic collision occurs between micro-mist and dust particles.

2 Absorption of growth

  The micro-mist is absorbed by dust  then growing into heavy particles.

3 Drop-down

  The heavy particles drop-down to achieve the purpose of dust removal.

The features

1 customized design

  customized design,rotating equipment to achieve continuous water supply

2 Treatment at the starting point of dust

  Treatment at the starting point of dust,no secondary transport pollution

3 Efficient 90％

  Especially for under 10um inhalable dust, the treatment effectiveness is as high as 90％.

4 Water consumption is small

  Most of the micro-mist particles are below 10um,water consumption is small, the material humidity weight ratio should not be greater than 0.05%

5 Low investment and cost

  Dry-mist dust suppression equipment is low investment,set with small area,full automatic operation,low operating and maintenance costs.

3w dot hjeqpt dot com

zero zero eight six one double seven three nine three two double one zero eight