Mirror-like effect coatings resin BC5043

 

Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.

 

BC5043 Physical and Chemical Data:

Test item	Standard
Appearance	Silver liquid
Hardness	48h:Grade F
Adhesion	48h:<1
Dry time-by touch	5mins(25℃)
Dry time-harden	<6 hours (relative humidity 70%)
Thickness(μm)	10

 

Characteristic＆Note:

1. Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
2. Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.

Dry time: surface dry<5 mins, thorougly dry<6 hours.

 

Construction Description:

1. Thoroughly stir it before use.
2. Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
3. Spray the film evenly, pervious to light is allowed.
4. In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
5. Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
6. Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.

 

 Mirror-like effect coatings resin BC5043

 

Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.

 

BC5043 Physical and Chemical Data:

Test item	Standard
Appearance	Silver liquid
Hardness	48h:Grade F
Adhesion	48h:<1
Dry time-by touch	5mins(25℃)
Dry time-harden	<6 hours (relative humidity 70%)
Thickness(μm)	10

 

Characteristic＆Note:

1. Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
2. Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.

Dry time: surface dry<5 mins, thorougly dry<6 hours.

 

Construction Description:

1. Thoroughly stir it before use.
2. Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
3. Spray the film evenly, pervious to light is allowed.
4. In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
5. Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
6. Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.