HT grapples are available in a wide-range of widths and tine configurations. From demolishing buildings to clearing brush and lifting heavy objects, the Graptor Rake sweeps through the toughest debris for maximum productivity on the job site.

Web: gochinaht.com

SPECIFICATION FOR GRAPPLE

1. Material:
1) Entire jaw structure is manufactured of quenched and tempered Q690 High Strength alloy steel, 130,000-psi min. yield 360-440
BHN.
2) The tine tips are 175,000-psi min. yield 450-550 BHN. Chromium plating.

2.Motor:
1) Motor drive adopts the design of symmetrical double support,strong shcok resistance, avoiding axle breakage and oil leakage.
2) Pedestal adopts sealed type design, better protect the rotary drive.
3)Output Torque:4 kN.m-8.5kN.m(6272lbf.ft)
Holding Torque 38kN.m-105kN.m(78000lbf.ft)
Moment Torque 26kN.m-203kN.m(150,000lbf.ft)

 

3. Strengths:
1) Sealed type rotary drive solve the oil leakage problem, only required light greasing(80g of grease) once 6 months(unlike most
of the product on the market needed greasing everyday) and better protect the product.
2) Motor drive adopted symetrical double support design, reducing the bearing load and extend service life.
3) The jaw structure is manufactured of Q690 High Strength Alloy Steel, lighter weight with twice of the strength comparing with
Q345(normally used on the market)

Main Features

1) Simple structure in linear type ,easy in installation and maintation. 

 

2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 

 

3) High pressure double crank to control the die opening and closing. 

 

4) Running in a high automatization and intellectualization,no pollution 

 

5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine . 

Details Images

Certifications

Our Company

Guangzhou Huitong Machinery Co,.Ltd

Guangzhou Huitong Machinery Co,.Ltd, also go by HT, was officially established in 2011 which is not that "old", but we are truly "formed" by our employees.

In 2010, We partnered up with an company in Foshan, and there were lots of conflicts going on, due to differentiation about the company's vision and approach. One year later, in 2011, we broke up with the other and dissolute the company. However, our  employees, 15 people at that time, were willing to be unpaid in order to bring back the company. It last for 5 months, and finally, we established our sole corporation, Guangzhou Huitong Machinery Co,. Ltd which means, in Chinese, union all the efforts.

There’s more to work at HuiTong than just the work itself. We take our responsibilities seriously and make sure our employees always work with pressures and challenges while feeling supported.

Products
Our main products including Excavator Attachments: Buckets, Rippers, Grapples, Quick Coupler, Hydraulic Vibration Hammer, Rakes, Hydraulic Orange Peel Grab. etc. Customizing Parts: Long Reach, Pilling Boom, High Reach Demolition, Rock Boom, Shortening Boom, Standard Boom. etc.

Honors
Ever since the beginning, We had been highly valued our quality and public praise. In 2014, We own our ISO certification. In 2018, we gain Guangdong High&New Tech company certification and got funding from the government. In 2019, We are one of the ten founders of China Construction Machinery Industry Association.

                                                               HT China, We provide the best fit attachments.

Our Service

Pre-Sales Service

* Inquiry and consulting support. 

* Sample Order accepting. 

* View our Factory.

 

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

 

Our Customers