Manufacture Stockholder Distributor of DIN Materials

Model:	DIN Standards
Brand:	Manufacture Stockholder Distributor of DIN Product
Origin:	Made In Germany
Category:	Industrial Supplies / Machine Hardware / Fastener & Fitting
Label:	DIN Materials , EN Materials , DIN EN Standard
Price:	-
Min. Order:	-

Inquire Now

Product Description

We are Manufacture, Stockholder & Distributors of EN Standard Materials, EN Standard Products, EN Approved Materials, EN Approved Products, DIN Standard Materials, DIN Standard Products, DIN Approved Materials, DIN Approved Products, ISO Standard Materials, ISO Standard Products, ISO Approved Materials, ISO Approved Products Pipes, Tubes, Sheets, Plates, Strips, Coils, Wires, Wire-Rod, Rods, Bars, Round, Square, Hex, Hexagonal, Nuts, Bolts, Washers, Fasteners, Fittings, Electrodes, Filler Wire, TMT Bar, Cold Drawn, Hot Rolled, Hot Forged, Cold Forging, Forgings, Castings, CNC Machined, Components, Wire Rope, Strands, Annealed, Normalized, Hardened & Tempered

Standard No	Title of Standard
EN 12668-3:2000	Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
EN 12669:2000	Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating
EN 1267:1999	Valves. Test of flow resistance using water as a test fluid
EN 12670:2002	Natural stone. Terminology
EN 12671:2000	Chemicals used for treatment of water intended for human consumption. Chlorine dioxide
EN 12672:2000	Chemicals used for treatment of water intended for human consumption. Potassium permanganate
EN 12673:1999	Water quality. Gas chromatographic determination of some selected chlorophenols in water
EN 12674-1:1999	Roll containers. Terminology
EN 12674-2:2002	Roll containers. General design and safety principles
EN 12675:2001	Traffic signal controllers. Functional safety requirements
EN 12676-1:2000	Anti-glare systems for roads. Performance and characteristics
EN 12676-2:2000	Anti-glare systems for roads. Test methods
EN 12678:2000	Chemicals used for treatment of water intended for human consumption. Potassium peroxomonosulfate
EN 12679:2000	Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method
EN 12680-1:2003	Founding. Ultrasonic examination. Steel castings for general purposes
EN 12680-2:2003	Founding. Ultrasonic examination. Steel castings for highly stressed components
EN 12680-3:2003	Founding. Ultrasonic examination. Spheroidal graphite cast iron castings
EN 12681:2003	Founding. Radiographic examination
EN 12682:1998	Biotechnology. Modified organisms for application in the environment. Guidance for the characterization
EN 12683:1998	Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism
EN 12685:1998	Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-organisms
EN 12686:1998	Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-organisms
EN 12687:1998	Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genomic modification
EN 12689:1998	Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products
EN 1269:1997	Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test
EN 12690:1999	Biotechnology. Performance criteria for shaft seals
EN 12691:2001	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
EN 12696:2000	Cathodic protection of steel in concrete
EN 12697-1:2000	Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content
EN 12697-10:2002	Bituminous mixtures. Test methods for hot mix asphalt. Compactibility
EN 12697-11:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the compatibility between aggregate and bitumen
EN 12697-12:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens
EN 12697-13:2000	Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement
EN 12697-14:2000	Bituminous mixtures. Test methods for hot mix asphalt. Water content
EN 12697-15:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the segregation sensitivity
EN 12697-16:2004	Bituminous mixtures. Test methods for hot mix asphalt. Abrasion by studded tyres
EN 12697-17:2004	Bituminous mixtures. Test methods for hot mix asphalt. Particle loss of porous asphalt specimen
EN 12697-18:2004	Bituminous mixtures. Test methods for hot mix asphalt. Binder drainage
EN 12697-19:2004	Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen
EN 12697-2:2002	Bituminous mixtures. Test methods for hot mix asphalt. Determination of particle size distribution
EN 12697-20:2003	Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or Marshall specimens
EN 12697-21:2003	Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens
EN 12697-22:2003	Bituminous mixtures. Test methods for hot mix asphalt. Wheel tracking
EN 12697-23:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the indirect tensile strength of bituminous specimens
EN 12697-24:2004	Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
EN 12697-25:2005	Bituminous mixtures. Test methods for hot mix asphalt. Cyclic compression test
EN 12697-26:2004	Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
EN 12697-27:2001	Bituminous mixtures. Test methods for hot mix asphalt. Sampling
EN 12697-28:2001	Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading
EN 12697-29:2002	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen
EN 12697-3:2005	Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator
EN 12697-30:2004	Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor
EN 12697-31:2004	Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation gyratory compactor
EN 12697-32:2003	Bituminous mixtures. Test methods for hot mix asphalt. Laboratory compaction of bituminous mixtures by vibratory compactor
EN 12697-33:2003	Bituminous mixtures. Test methods for hot mix asphalt. Specimen prepared by roller compactor
EN 12697-34:2004	Bituminous mixtures. Test methods for hot mix asphalt. Marshall test
EN 12697-35:2004	Bituminous mixtures. Test methods for hot mix asphalt. Laboratory mixing
EN 12697-36:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement
EN 12697-37:2003	Bituminous mixtures. Test methods for hot mix asphalt. Hot sand test for the adhesivity of binder on precoated chippings for HRA
EN 12697-38:2004	Bituminous mixtures. Test methods for hot mix asphalt. Test equipment and calibration
EN 12697-39:2004	Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
EN 12697-4:2005	Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column
EN 12697-5:2002	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
EN 12697-6:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
EN 12697-7:2002	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the bulk density of bituminous specimens by gamma rays
EN 12697-8:2003	Bituminous mixtures. Test methods for hot mix asphalt. Determination of void characteristics of bituminous specimens
EN 12697-9:2002	Bituminous mixtures. Test methods for hot mix asphalt. Determination of the reference density
EN 12699:2001	Execution of special geotechnical work. Displacement piles
EN 1270:1998	Playing field equipment. Basketball equipment. Functional and safety requirements, test methods
EN 12701:2001	Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials
EN 12702:2000	Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers
EN 12703:1999	Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
EN 12704:2000	Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives
EN 12705:2000	Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
EN 12706:2000	Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics
EN 12707:2000	Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l
EN 12708:2000	Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l
EN 12709:2000	Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
EN 1271:2004	Playing field equipment. Volleyball equipment. Functional and safety requirements, test methods
EN 12710:2000	Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
EN 12711:2000	Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l
EN 12712:2000	Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
EN 12713:2000	Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L
EN 12714:2000	Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L
EN 12715:2000	Execution of special geotechnical work. Grouting
EN 12716:2001	Execution of special geotechnical works. Jet grouting
EN 12717:2001	Safety of machine tools. Drilling machines
EN 1272:1998	Child care articles. Table mounted chairs. Safety requirements and test methods
EN 12720:1997	Furniture. Assessment of surface resistance to cold liquids
EN 12721:1997	Furniture. Assessment of surface resistance to wet heat
EN 12722:1997	Furniture. Assessment of surface resistance to dry heat
EN 12723:2000	Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units
EN 12726:2000	Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
EN 12727:2000	Furniture. Ranked seating. Test methods and requirements for strength and durability
EN 12728:2000	Surface active agents. Determination of foaming power. Perforated disc beating method
EN 12729:2002	Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
EN 1273:2005	Child use and care articles. Baby walking frames. Safety requirements and test methods
EN 12730:2001	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading
EN 12732:2000	Gas supply systems. Welding steel pipework. Functional requirements
EN 12733:2001	Agricultural and forestry machinery. Pedestrian controlled motor mowers. Safety
EN 12734:2000	Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing
EN 12735-1:2001	Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems
EN 12735-2:2001	Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment
EN 12736:2001	Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level
EN 12737:2004	Precast Concrete Products. Floor Slats for Livestock
EN 12738:1999	Biotechnology. Laboratories for research, development and analysis. Guidance for containment of animals inoculated with microorganisms in experiments
EN 1274:2004	Thermal spraying. Powders. Composition, technical supply conditions
EN 12740:1999	Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste
EN 12741:1999	Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations
EN 12742:1999	Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method
EN 12743:1999	Footwear. Test methods for outsoles. Compression energy
EN 12744:1999	Footwear. Test methods for insoles. Delamination resistance
EN 12745:1999	Footwear. Test methods for insoles. Pin holding strength
EN 12746:2000	Footwear. Test methods for insoles and insocks. Water absorption and desorption
EN 12747:1999	Footwear. Test methods for insoles. Abrasion resistance

EN 12748:1999	Footwear. Test methods for outsoles, insoles, linings and insocks. Water soluble content
EN 12749:1999	Footwear. Ageing conditioning
EN 1275:1997	Chemical disinfectants and antiseptics. Basic fungicidal activity. Test method and requirements (phase 1)
EN 12750:2001	Safety of woodworking machines. Four-sided moulding machines
EN 12751:1999	Textiles. Sampling of fibres, yarns and fabrics for testing
EN 12752-1:1999	Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Safety
EN 12752-2:1999	Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Rational use of energy
EN 12753:2005	Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements
EN 12754:2002	Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling
EN 12755:2000	Transportable gas cylinders. Filling conditions for acetylene bundles
EN 12756:2001	Mechanical seals. Principal dimensions, designation and material codes
EN 12758:2002	Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties
EN 12759:2001	Rubber- or plastic-coated fabrics. Determination of resistance to liquids
EN 1276:1997	Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics
EN 12760:1999	Valves. Socket welding ends for steel valves
EN 12761-1:2001	Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General
EN 12761-2:2001	Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
EN 12761-3:2001	Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
EN 12763:2000	Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
EN 12764:2004	Sanitary appliances. Specification for whirlpool baths
EN 12765:2001	Classification of thermosetting wood adhesives for non-structural applications
EN 12766-1:2000	Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products.
EN 12766-2:2001	Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products.
EN 12766-3:2004	Petroleum products and used oils. Determination of PCBs and related products.
EN 12767:2000	Passive safety of support structures for road equipment. Requirements and test methods
EN 1277:2003	Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications.
EN 12770:2000	Footwear. Test methods for outsoles. Abrasion resistance
EN 12771:2000	Footwear. Test methods for outsoles. Tear strength
EN 12772:2000	Footwear. Test methods for outsoles. Dimensional stability
EN 12773:2000	Footwear. Test methods for outsoles. Needle tear strength
EN 12774:2000	Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance
EN 12775:2001	Solid wood panels. Classification and terminology
EN 12778:2002	Cookware. Pressure cookers for domestic use
EN 12779:2004	Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements
EN 1278:1999	Chemicals used for treatment of water intended for human consumption. Ozone
EN 12780:2002	Water quality. Detection and enumeration of Pseudomonas aeruginosa by membrane filtration
EN 12781:2001	Wallcoverings. Specification for cork panels
EN 12782:2000	Footwear. Test methods for insoles. Resistance to stitch tear
EN 12784:2000	Footwear. Test methods for the whole shoe. Thermal insulation
EN 12785:2000	Footwear. Test methods for whole shoe. Heel attachment
EN 12786:1999	Safety of machinery. Guidance for the drafting of vibration clauses of safety standards
EN 12789:2002	Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
EN 12790:2002	Child care articles. Reclined cradles
EN 1279-1:2004	Glass in building. Insulating glass units. Generalities, dimensional tolerances and rules for the system description
EN 1279-2:2002	Glass in building. Insulating glass units. Long term test method and requirements for moisture penetration
EN 12792:2003	Ventilation for buildings. Symbols, terminology and graphical symbols
EN 1279-3:2002	Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances
EN 1279-4:2002	Glass in building. Insulating glass units. Methods of test for the physical attributes of edge seals
EN 12794:2005	Precast concrete products. Foundation piles
EN 12795:2003	Road transport and traffic telematics. Dedicated short range communication (DSRC). DSRC data link layer. Medium access and logical link control
EN 1279-6:2002	Glass in building. Insulating glass units. Factory production control and periodic tests
EN 12797:2000	Brazing. Destructive tests of brazed joints
EN 12798:1999	Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement BS EN ISO 9002 for the transport of dangerous goods with regard to safety
EN 12799:2000	Brazing. Non-destructive examination of brazed joints
EN 12800:2000	Footwear. Test methods for insoles. Dimensional stability
EN 1280-1:1997	Agent specific filling systems for anaesthetic vaporizers. Rectangular keyed filling systems
EN 12801:2000	Footwear. Test methods for insoles, lining and insocks. Perspiration resistance
EN 12802:2000	Road marking materials. Laboratory methods for identification
EN 12803:2000	Footwear. Test methods for outsoles. Tensile strength and elongation
EN 12805:2002	Automotive LPG components. Containers
EN 12806:2003	Automotive liquefied petroleum gas components. Other than containers
EN 12807:2001	Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
EN 12808-1:1999	Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars
EN 12808-2:2002	Adhesives and grouts for tiles. Determination of resistance to abrasion
EN 12808-3:2002	Adhesives and grouts for tiles. Determination of flexural and compressive strength
EN 12808-4:2002	Adhesives and grouts for tiles. Determination of shrinkage
EN 12808-5:2002	Adhesives and grouts for tiles. Determination of water absorption
EN 12809:2001	Residential independent boilers fired by solid fuel. Nominal heat output up to 50 kW. Requirements and test methods
EN 12810-1:2003	Facade scaffolds made of prefabricated components. Product specifications
EN 12810-2:2003	Facade scaffolds made of prefabricated components. Particular methods of structural design
EN 12811-1:2003	Temporary works equipment. Scaffolds. Performance requirements and general design
EN 12811-2:2004	Temporary works equipment. Information on materials
EN 12811-3:2002	Temporary works equipment. Load testing
EN 1281-2:1996	Anaesthetic and respiratory equipment. Conical connectors. Screw-threaded, weight-bearing connectors
EN 12812:2004	Falsework. Performance requirements and general design
EN 12813:2004	Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design
EN 12814-1:2000	Testing of welded joints of thermoplastics semi-finished products. Bend test
EN 12814-2:2000	Testing of welded joints of thermoplastics semi-finished products. Tensile test
EN 12814-3:2000	Testing of welded joints of thermoplastics semi-finished products. Tensile creep test
EN 12814-4:2001	Testing of welded joints of thermoplastics semi-finished products. Peel test
EN 12814-5:2000	Testing of welded joints of thermoplastics semi-finished products. Macroscopic examination
EN 12814-6:2000	Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test
EN 12814-7:2002	Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens
EN 12814-8:2001	Testing of welded joints of thermoplastic semi-finished products -. Requirements
EN 12815:2001	Residential cookers fired by solid fuel. Requirements and test methods
EN 12816:2001	Transportable refillable steel and aluminium LPG cylinders. Disposal
EN 12817:2002	Inspection and requalification of LPG tanks up to and including 13 m$u3 overground
EN 12818:2002	Inspection and requalification of LPG tanks up to and including 13 m$u3 underground
EN 12819:2002	Inspection and requalification of LPG tanks greater than 13 m$u3 overground
EN 12820:2002	Inspection and requalification of LPG tanks greater than 13 m$u3 underground
EN 12821:2000	Foodstuffs. Determination of vitamin D by high perfomance liquid chromatography. Measurement of cholecalciferol (D$d3) and ergocalciferol (D$d2)
EN 1282-2:1997	Anaesthetic and respiratory equipment. Tracheostomy tubes. Paediatric tubes
EN 12822:2000	Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of $Ga-, $Gb-, $Gg- and $Gd-tocopherols
EN 12823-1:2000	Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-trans-retinol and 13-cis-retinol
EN 12823-2:2000	Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of $Gb-carotene
EN 12825:2001	Raised access floors
EN 12826:2000	Footwear. Test methods for lining and insocks. Static friction
EN 12827:1999	Inland navigation vessels. Connections for the transfer of diesel oil
EN 12828:2003	Heating systems in buildings. Design for water-based heating systems
EN 12829:1998	Surface active agents. Preparation of water with known calcium hardness
EN 1283:1996	Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits
EN 12830:1999	Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability
EN 12831:2003	Heating systems in buildings. Method for calculation of the design heat load
EN 12832:1999	Characterisation of sludges. Utilisation and disposal of sludges. Vocabulary
EN 12833:2001	Skylight and conservatory roller shutters. Resistance to snow load. Test method
EN 12834:2003	Road transport and traffic telematics. Dedicated Short Range Communication (DSRC). DSRC application layer
EN 12835:2001	Airtight shutters. Air permeability test
EN 12836:2002	Surface active agents. Determination of the water number of alkoxylated products
EN 12838:2000	Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems
EN 12839:2001	Precast concrete products. Elements for fences
EN 12840:2001	Safety of machine tools. Manually controlled turning machines with or without automatic control
EN 12842:2000	Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
EN 12843:2004	Precast concrete products. Masts and poles
EN 12844:1999	Zinc and zinc alloys. Castings. Specifications
EN 12845:2004	Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance

EN 12846:2002	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method
EN 12847:2002	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions
EN 12848:2002	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of mixing stability with cement of bitumen emulsions
EN 12849:2002	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions
EN 12850:2002	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the pH value of bitumen emulsions
EN 12852:2001	Food processing machinery. Food processors and blenders. Safety and hygiene requirements
EN 12853:2001	Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements
EN 12854:2003	Food processing machinery. Beam mixers. Safety and hygiene requirements
EN 12855:2003	Food processing machinery. Rotating bowl cutters. Safety and hygiene requirements
EN 12856:1999	Foodstuffs. Determination of acesulfame-K, aspartame and saccharin. High performance liquid chromatographic method
EN 12857:1999	Foodstuffs. Determination of cyclamate. High performance liquid chromatographic method
EN 12858:1999	Paper. Printing and business paper. Requirements for continuous stationery
EN 12859:2001	Gypsum blocks. Definitions, requirements and test methods
EN 1286:1999	Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
EN 12860:2001	Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods
EN 12861:1999	Copper and copper alloys. Scrap
EN 12862:2000	Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 12863:2002	Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders
EN 12864:2001	Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar
EN 12865:2001	Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure
EN 12868:1999	Child use and care articles. Methodes for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers
EN 1287:1999	Sanitary tapware. Low pressure thermostatic mixing valves. General technical specifications
EN 12871:2001	Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
EN 12873-1:2003	Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious factory made products
EN 12873-2:2005	Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious site-applied materials
EN 12874:2001	Flame arresters. Performance requirements, test methods and limits for use
EN 12875-2:2002	Mechanical dishwashing resistance of domestic utensils. Inspection of non-metallic articles
EN 12876:2000	Chemicals used for treatment of water intended for human consumption. Oxygen
EN 12877-1:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. General introduction
EN 12877-2:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by injection moulding
EN 12877-3:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by oven test
EN 12877-4:2000	Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by two-roll milling
EN 12878:2005	Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
EN 12879:2000	Characterization of sludges. Determination of the loss of ignition of dry mass
EN 12880:2000	Characterization of sludges. Determination of dry residue and water content
EN 1288-1:2000	Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
EN 1288-2:2000	Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with large test surface areas
EN 12882:2002	Conveyor belts for general purpose use. Electrical and flammability safety requirements
EN 12883:2000	Founding. Equipment for the production of lost patterns for the lost wax casting process
EN 1288-3:2000	Glass in building. Determination of the bending strength of glass. Test with specimen supported at two points (four point bending)
EN 12884:1999	Biotechnology. Performance criteria for centrifuges
EN 1288-4:2000	Glass in building. Determination of the bending strength of glass. Testing of channel shaped glass
EN 12885:1999	Biotechnology. Performance criteria for cell disrupters
EN 1288-5:2000	Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with small test surface areas
EN 12889:2000	Trenchless construction and testing of drains and sewers
EN 1289:1998	Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels
EN 12890:2000	Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
EN 12892:2000	Founding. Equipment for the production of lost patterns for the lost foam casting process
EN 12893:2000	Copper and copper alloys. Determination of spiral elongation number
EN 12895:2000	Industrial trucks. Electromagnetic compability
EN 12898:2001	Glass in building. Determination of the emissivity
EN 12899-1:2001	Fixed, vertical road traffic signs. Fixed signs
EN 1290:1998	Non-destructive examination of welds. Magnetic particle examination of welds
EN 12900:1999	Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
EN 129000:1996	Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
EN 12901:1999	Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Definitions
EN 12902:2004	Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test
EN 12903:2003	Products used for the treatment of water intended for human consumption. Powdered activated carbon
EN 12904:2005	Products used for treatment of water intended for human consumption. Silica sand and silica gravel
EN 12905:1999	Products used for treatment of water intended for human consumption. Expanded aluminosilicate
EN 12906:1999	Products used for treatment of water intended for human consumption. Pumice
EN 12907:2003	Products used for the treatment of water intended for human consumption. Pyrolyzed coal material
EN 12909:1999	Products used for treatment of water intended for human consumption. Anthracite
EN 1291:1998	Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
EN 12910:1999	Products used for treatment of water intended for human consumption. Garnet
EN 129100:1995	Harmonized system of quality assessment for electronic components. Sectional specification: wirewound surface mounting inductors
EN 129101:1995	Harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. Assessment level E
EN 129102:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality.
EN 12911:1999	Products used for treatment of water intended for human consumption. Manganese greensand
EN 12912:1999	Products used for treatment of water intended for human consumption. Barite
EN 12913:1999	Products used for treatment of water intended for human consumption. Powdered diatomaceous earth
EN 12914:1999	Products used for treatment of water intended for human consumption. Powdered perlite
EN 12915-1:2003	Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon
EN 12915-2:2003	Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
EN 12916:2000	Methods of test for petroleum and its products. Petroleum products. Determination of aromatic hydrocarbon in middle distillates.
EN 12918:1999	Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
EN 12919:1999	Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
EN 129200:1996	Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits
EN 129201:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound inductors with ceramic or ferrite core. Assessment level E
EN 129202:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirebound inductors with ceramic or ferrite core. Assessment level P
EN 12921-3:2005	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids
EN 12926:2000	Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate
EN 12927-1:2004	Safety requirements for cableways installation designed to carry persons. Ropes. Selection criteria for ropes and their end fixing
EN 12927-2:2004	Safety requirements for cableway installations designed to carry persons. Ropes. Safety factors
EN 12927-3:2004	Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes
EN 12927-4:2004	Safety requirements for cableway installations designed to carry person. Ropes. End fixings
EN 12927-5:2004	Safety requirements for cableway installations designed to carry person. Ropes. Storage, transportation, installation and tensioning
EN 12927-6:2004	Safety requirements for cableway installations designed to carry persons. Ropes. Discard criteria
EN 12927-7:2004	Safety requirments for cableways installations designed to carry persons. Ropes. Inspection, repair and maintenance
EN 12927-8:2004	Safety requirements for cableways installation designed to carry persons. Ropes. Magnetic rope testing (MRT)
EN 12928:2000	Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l
EN 12929-1:2004	Safety requirements for cableways installation designed to carry persons. General requirements. Requirements for all installations
EN 12929-2:2004	Safety requirments for cableways installations designed to carry persons. General requirements. Additional reqirments for reversible bicable aerial ropeways without carrier truck brakes
EN 1293:1999	General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
EN 12930:2004	Safety requirements for cableway installations designed to carry persons. Calculations
EN 12931:2000	Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous
EN 12932:2000	Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate
EN 12933:2000	Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid
EN 12934:2000	Feather and down. Composition labelling of processed feathers and down for use as sole filling material
EN 12935:2001	Feather and down. Hygiene and cleanliness requirements
EN 12938:2000	Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
EN 12939:2001	Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods.
EN 1294:2000	Door leaves. Determination of the behaviour under humidity variations in successive uniform climates
EN 12940:2004	Footwear manufacturing wastes. Waste classification and management
EN 12941:1999	Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking
EN 12942:1999	Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking
EN 12943:2000	Filler materials for thermoplastics. Scope, designation, requirements, tests
EN 12944-1:2000	Fertilizers and liming materials. Vocabulary. General terms
EN 12944-2:2000	Fertilizers and liming materials. Vocabulary. Terms relating to fertilizers
EN 12944-3:2002	Fertilizers and liming materials. Vocabulary. Terms relating to liming materials
EN 12945:2002	Liming materials. Determination of neutralizing value. Titrimetric methods
EN 12946:2000	Liming materials. Determination of calcium content and magnesium content. Complexometric method
EN 12947:2000	Liming materials. Determination of magnesium content. Atomic absorption spectrometric method
EN 12948:2002	Liming materials. Determination of size distribution by dry and wet sieving
EN 1295-1:1998	Structural design of buried pipelines under various conditions of loading. General requirements

EN 12952-1:2001	Water-tube boilers and auxiliary installations. General
EN 12952-10:2002	Water-tube boilers and auxiliary installations. Requirements for safeguards against excessive pressure
EN 12952-12:2003	Water-tube boilers and auxiliary installations. Requirements for boiler feedwater and boiler water quality
EN 12952-13:2003	Water-tube boilers and auxiliary installations. Part 13:Requirements for flue gas cleaning systems
EN 12952-14:2004	Water-tube boilers and auxiliary installations. Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
EN 12952-15:2003	Water-tube boilers and auxiliary installations. Acceptance tests
EN 12952-16:2002	Water-tube boilers and auxiliary installations. Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
EN 12952-2:2001	Water-tube boilers and auxiliary installations. Materials for pressure parts of boilers and accessories
EN 12952-3:2001	Water-tube boilers and auxiliary installations. Design and calculation of pressure parts
EN 12952-4:2000	Water-tube boilers and auxiliary installations. In-service boiler life expectancy calculations
EN 12952-5:2001	Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
EN 12952-6:2002	Water-tube boilers and auxiliary installations. Inspection during construction, documentation and marking of pressure parts of the boiler
EN 12952-7:2002	Water-tube boilers and auxiliary installations. Requirements for equipment for the boiler
EN 12952-8:2002	Water-tube boilers and auxiliary installations. Requirements for firing systems for liquid and gaseous fuels for the boiler
EN 12952-9:2002	Water-tube boilers and auxiliary installations. Requirements for firing systems for pulverized solid fuels for the boiler
EN 12953-1:2002	Shell boilers. General
EN 12953-10:2003	Shell boilers. Requirements for feedwater and boiler water quality
EN 12953-11:2003	Shell boilers. Acceptance tests
EN 12953-12:2003	Shell boilers. Requirements for grate firing systems for solid fuels for the boiler
EN 12953-2:2002	Shell boilers. Materials for pressure parts of boilers and accessories
EN 12953-3:2002	Shell boilers. Design and calculation for pressure parts
EN 12953-4:2002	Shell boilers. Workmanship and construction of pressure parts of the boiler
EN 12953-5:2002	Shell boilers. Inspection during construction, documentation and marking of pressure parts of the boiler
EN 12953-6:2002	Shell boilers. Requirements for equipment for the boiler
EN 12953-7:2002	Shell boilers. Requirements for firing systems for liquid and gaseous fuels for the boilers
EN 12953-8:2001	Shell boilers. Requirements for safeguards against excessive pressure
EN 12954:2001	Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines
EN 12955:1999	Foodstuffs. Determination of aflatoxin B$d1, and the sum of aflatoxins B$d1, B$d2, G$d1 and G$d2 in cereals, shell-fruits and derived products.
EN 12956:1999	Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability
EN 12957:2001	Machine tools. Safety. Electro discharge machines
EN 12958:2000	Footwear. Test methods for shanks. Fatigue resistance
EN 12959:2000	Footwear. Test methods for shanks. Longitudinal stiffness
EN 1296:2001	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature
EN 12960:2001	Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance
EN 12961:2001	Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
EN 12962:2001	Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index)
EN 12963:2001	Adhesives. Determination of free monomer content in adhesives based on synthetic polymers
EN 12964:2001	Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature
EN 12965:2003	Tractors and machinery for agriculture and forestry. Power take-off (PTO) drive shafts and their guards. Safety
EN 12966-1:2005	Road vertical signs. Variable message traffic signs. Product standard
EN 12966-2:2005	Road vertical signs. Variable message traffic signs. Initial type testing
EN 12966-3:2005	Road vertical signs. Variable message traffic signs. Factory production control
EN 12970:2000	Mastic asphalt for waterproofing. Definitions, requirements and test methods
EN 12971-1:1999	Reinforcements. Specification for textile glass chopped strands. Designation
EN 12971-2:1999	Reinforcements. Specification for textile glass chopped strands. Test methods and general requirements
EN 12971-3:1999	Reinforcements. Specification for textile glass chopped strands. Specific requirements
EN 12972:2001	Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
EN 12973:2000	Value Management
EN 12974:2000	Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
EN 12975-1:2000	Thermal solar systems and components. Solar collectors. General requirements
EN 12975-2:2001	Thermal solar systems and components. Solar collectors. Test methods
EN 12976-1:2001	Thermal solar systems and components. Factory made systems. General requirements
EN 12976-2:2001	Thermal solar systems and components. Factory made systems. Test methods
EN 12978:2003	Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods
EN 12979:2002	Automotive LPG systems. Installation requirements
EN 1298:1996	Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual
EN 12980:2000	Materials and articles in contact with foodstuffs. Non-metallic articles for catering and industrial use. Method of test for the determination of impact resistance
EN 12981:2005	Coating plants. Spray booths for application of organic powder coating material. Safety requirements
EN 12982:2000	Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves
EN 12983-1:2000	Cookware. Domestic cookware for use on top of a stove, cooker or hob. General requirements
EN 1299:1997	Mechanical vibration and shock. Vibration isolation of machines. Information for the application of source isolation
EN 12999:2002	Cranes. Loader cranes
EN 1300:2004	Secure storage units. Classification for high security locks according to their resistance to unauthorized opening
EN 13001-1:2004	Crane safety. General design. General principles and requirements
EN 13001-2:2004	Crane safety. General design. Load effects
EN 13002-2:1999	Carbon fibre yarns. Test methods and general specifications
EN 13003-1:1999	Para-aramid fibre filament yarns. Designation
EN 13003-2:1999	Para-aramid fibre filament yarns. Methods of test and general specifications
EN 13003-3:1999	Para-aramid fibre filament yarns. Technical specifications
EN 13007:2000	Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
EN 13008:2000	Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l
EN 13009:2000	Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient
EN 13010:2003	Packaging. Unit packaging. Dimensions and requirements for pegboard display
EN 130100:1998	Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
EN 130101:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current.
EN 130102:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current.
EN 1301-1:1997	Aluminium and aluminium alloys. Drawn wire. Technical conditions for inspection and delivery
EN 13011:2001	Transport services. Goods transport chains. System for declaration of performance conditions
EN 1301-2:1997	Aluminium and aluminium alloys. Drawn wire. Mechanical properties
EN 13012:2001	Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
EN 1301-3:1997	Aluminium and aluminium alloys. Drawn wire. Tolerances on dimensions
EN 13014:2000	Connections for gas sampling tubes to anaesthetic and respiratory equipment
EN 13015:2001	Maintenance for lifts and escalators. Rules for maintenance instructions
EN 13016-1:2000	Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP)
EN 13016-2:2000	Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 $0DC and 100 $0DC
EN 13017-1:2001	Solid wood panels. Classification by surface appearance. Solid wood panels. Classification by surface appearance. Softwood
EN 13017-2:2001	Solid wood panels. Classification by surface appearance. Hardwood
EN 13018:2001	Non-destructive testing. Visual testing. General principles
EN 13019:2001	Machines for road surface cleaning. Safety requirements
EN 1302:1999	Chemicals used for treatment of water intended for human consumption. Aluminium-based coagulants. Analytical methods
EN 13020:2004	Road surface treatment machines. Safety requirements
EN 130200:1993	Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
EN 130201:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
EN 130202:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
EN 13021:2003	Winter service machines. Safety requirements
EN 13023:2003	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
EN 13024-1:2002	Glass in building. Thermally toughened borosilicate safety glass. Definition and description
EN 13024-2:2004	Glass in building. Thermally toughened borosilicate safety glass. Evaluation of conformity/Product standard
EN 13025:2000	Packaging. Light gauge metal packaging. Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml
EN 13026:2001	Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
EN 13027:2001	Packaging. Light-gauge metal packaging. Open-top round cans defined by their nominal gross-lidded capacity
EN 13028:2001	Packaging. Light-gauge metal packaging. Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
EN 13029:2001	Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures
EN 1303:2005	Building hardware. Cylinders for locks. Requirements and test methods
EN 13030:2001	Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain
EN 130300:1998	Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
EN 130301:2002	Harmonized system of quality assessment for electronic components. Blank Detail Specification. Aluminium electrolytic capacitors with non-solid electrolyte
EN 13031-1:2001	Greenhouses. Design and construction. Commercial production greenhouses
EN 13032-1:2004	Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format
EN 13032-2:2004	Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for indoor and outdoor work places
EN 13034:2005	Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals
EN 13035-3:2003	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Cutting machines
EN 13035-4:2003	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Tilting tables
EN 13036-1:2002	Road and airfield surface characteristics. Test methods. Measurement of pavement surface macrotexture depth using a volumetric patch technique
EN 13036-3:2002	Road and airfield surface characteristics. Test methods. Measurement of pavement surface horizontal drainability

EN 13036-4:2003	Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test
EN 13036-7:2003	Road and airfield surface characteristics. Test methods. Irregularity measurement of pavement courses. The straightedge test
EN 13037:2000	Soil improvers and growing media. Determination of pH
EN 13038:2000	Soil improvers and growing media. Determination of electrical conductivity
EN 13039:2000	Soil improvers and growing media. Determination of organic matter content and ash
EN 1304:1998	Clay roofing tiles for discontinuous laying. Products definitions and specifications
EN 13040:2000	Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
EN 13041:2000	Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space
EN 13042-2:2004	Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Handling machines for feeding
EN 13042-5:2003	Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Presses
EN 13043:2002	Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13044:2001	Swap bodies. Coding, identification and marking
EN 13045:2000	Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
EN 13046:2000	Packaging. Flexible cylindrical metallic tubes. Dimensions and tolerances
EN 13047:2000	Packaging. Flexible conical metallic tubes. Dimensions and tolerances
EN 13048:2000	Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method
EN 13049:2003	Windows. Soft and heavy body impact. Test method, safety requirements and classification
EN 1305:1996	Inland navigation vessels. Connections for the discharge of oily mixture
EN 130500:1998	Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
EN 130501:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current.
EN 130502:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current.
EN 13051:2001	Curtain walling. Watertightness. Site test
EN 13052-1:2001	Influence of materials on water intended for human consumption. Organic materials. Determination of colour and turbidity of water in piping systems. Test method
EN 13053:2001	Ventilation for buildings. Air handling units. Ratings and performance for units, components and sections
EN 13054:2001	Packaging. Complete, filled transport packages. Test methods for the determination of the centre of gravity of a package
EN 13055-1:2002	Lightweight aggregates. Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004	Lightweight aggregates. Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13056:2000	Inland navigation vessels. Stairs with inclination angles of 30 degrees to $0L 45 degrees. Requirements, types
EN 13057:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption
EN 13059:2002	Safety of industrial trucks. Test methods for measuring vibration
EN 1306:1996	Inland navigation vessels. Connections for the discharge of waste water
EN 13061:2001	Protective clothing. Shin guards for association football players. Requirements and test methods
EN 13062:2003	Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement
EN 13067:2003	Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies
EN 13068-1:2000	Non-destructive testing. Radioscopic testing. Quantitative measurement of imaging properties
EN 13068-2:2000	Non-destructive testing. Radioscopic testing. Check of long term stability of imaging devices
EN 13068-3:2001	Non-destructive testing. Radioscopic testing. General principles of radioscopic testing of metallic materials by X- and gamma rays
EN 1307:1997	Textile floor coverings. Classification of pile carpets
EN 13071:2002	Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
EN 13073:2001	Footwear. Test methods for whole shoe. Water resistance
EN 13074:2002	Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation
EN 13075-1:2002	Methods of test for petroleum and its products. Determination of breaking value of cationic bitumen emulsions, mineral filler method
EN 13075-2:2002	Methods of test for petroleum and its products. Determination of fines mixing time of cationic bitumen emulsions
EN 13076:2003	Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A
EN 13077:2003	Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrstricted). Family A, type B.
EN 13078:2003	Devices to prevent pollution by backflow of potable water. Air gap with submerged feed incorporating air inlet plus overflow. Family A, type C
EN 13079:2003	Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D
EN 1308:1999	Adhesives for tiles. Determination of slip
EN 13080:2002	Agricultural machinery. Manure spreaders. Environmental protection. Requirements and test methods
EN 130800:2001	Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors
EN 13081:2001	Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adapter and coupler
EN 13082:2001	Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
EN 13083:2001	Tanks for transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading
EN 13084-1:2000	Free-standing industrial chimneys. Free-standing industrial chimneys. General requirements
EN 13084-2:2001	Free-standing industrial chimneys. Concrete chimneys
EN 13084-4:2002	Free-standing industrial chimneys. Brick liners. Design and execution
EN 13084-6:2004	Free-standing chimneys. Steel liners. Design and execution
EN 13084-8:2005	Free-standing industrial chimneys. Design and execution of mast construction with satellite components
EN 13085:2001	Wallcoverings. Specification for cork rolls
EN 13086:2000	Lead and lead alloys. Lead oxides
EN 13087-1:2000	Protective helmets. Test methods. Conditions and conditioning
EN 13087-10:2000	Protective helmets. Test methods. Resistance to radiant heat
EN 13087-2:2000	Protective helmets. Test methods. Shock absorption
EN 13087-3:2000	Protective helmets. Test methods. Resistance to penetration
EN 13087-4:2000	Protective helmets. Test methods. Retention system effectiveness
EN 13087-5:2000	Protective helmets. Test methods. Retention system strength
EN 13087-6:2000	Protective helmets. Test methods. Field of vision
EN 13087-7:2000	Protective helmets. Test methods. Flame resistance
EN 13087-8:2000	Protective helmets. Test methods. Electrical properties
EN 13088:2001	Manufactured articles filled with feather and down. Method for the determination of a filled product's total mass and of the mass of the filling
EN 13089:1999	Mountaineering equipment. Ice tools. Safety requirements and test methods
EN 13090:2000	Means for resealing threaded joints of gas pipework in buildings
EN 130900:1998	Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
EN 130901:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E
EN 130902:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level EZ
EN 1309-1:1997	Round and sawn timber. Method of measurement of dimensions. Sawn timber
EN 13091:2000	Biotechnology. Performance criteria for filter elements and filtration assemblies
EN 13092:2000	Biotechnology. Guidance on sampling and inoculation procedures
EN 13094:2004	Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
EN 13095:2000	Biotechnology. Performance criteria for off-gas systems
EN 13096:2003	Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases
EN 13098:2001	Workplace atmospheres. Guidelines for measurement of airborne micro-organisms and endotoxin
EN 13099:2003	Transportable gas cylinders. Conditions for filling gas mixtures into receptacles
EN 1310:1997	Round and sawn timber. Method of measurement of features
EN 13100-1:2000	Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination
EN 13100-2:2004	Non destrictive testing of welded joints of thermoplastics semi-finished products. X-ray radiographic testing
EN 13100-3:2004	Non-destructive testing of welded joints in thermoplastics semi-finished products. Ultrasonic testing
EN 13101:2002	Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
EN 13103:2001	Railway applications. Wheelsets and bogies. Non-powered axles. Design method
EN 13104:2001	Railway applications. Wheelsets and bogies. Powered axles. Design method
EN 13107:2004	Safety requirements for cableway installations designed to carry persons. Civil engineering works
EN 13109:2002	LPG tanks. Disposal
EN 131-1:1993	Ladders. Specification for terms, types, functional sizes
EN 1311:1997	Round and sawn timber. Method of measurement of biological degrade
EN 13110:2002	Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction
EN 13111:2001	Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration
EN 13112:2002	Tannery machines. Splitting and bandknife shearing machines. Safety requirements
EN 13113:2002	Tannery machines. Roller coating machines. Safety requirements
EN 13114:2002	Tannery machines. Rotating process vessels. Safety requirements
EN 13115:2001	Windows. Classification of mechanical properties. Racking, torsion and operating forces
EN 13116:2001	Curtain walling. Resistance to wind load. Performance requirements
EN 13117-1:2000	Transport packaging. Reusable, rigid plastics distribution boxes. General purpose application
EN 13117-2:2000	Transport packaging. Reusable, rigid plastics distribution boxes. General specifications for testing
EN 13118:2000	Agricultural machinery. Potato harvesting equipment. Safety
EN 131-2:1993	Ladders. Specification for requirements, testing, marking
EN 1312:1997	Round and sawn timber. Determination of the batch volume of sawn timber
EN 13120:2004	Internal blinds. Performance requirements including safety
EN 131200:2002	Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectric
EN 131201:2002	Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric
EN 13121-1:2003	GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions
EN 13121-2:2003	GRP tanks and vessels for use above ground. Composite materials. Chemical resistance
EN 13121-4:2005	GRP tanks and vessels for use above ground. Delivery, installation and maintenance
EN 13123-1:2001	Windows, doors and shutters. Explosion resistance. Requirements and classification. Shock tube
EN 13123-2:2004	Windows, doors, and shutters. Explosion resistance. Requirements and classification. Range test
EN 13124-1:2001	Windows, doors and shutters. Explosion resistance. Test method. Shock tube