Cooling Tower Filler-VF610-LC (China Trading Company) - Other Industrial Supplies - Industrial Supplies Products

Cooling Tower Filler-VF610-LC

Model:	-
Brand:	-
Origin:	Made In China
Category:	Industrial Supplies / Other Industrial Supplies
Label:	Cooling tower fill , Drift eliminator , Water tank
Price:	-
Min. Order:	-

Inquire Now

Product Description

Cooling Tower Filler-VF610-LC

PRODUCT DESCRIPTION

Cooling Tower Fill introduction

The cooling tower is a cooling device, which makes the hot water in the tower be cooled mainly by the evaporative cooling of water. In order to make full use of water resources, reduce the load of urban tap water supply network, and reduce the operating cost, cooling water is treated by cooling tower and recycled.

“Fill” is a medium that used in cooling towers to increase the surface area available for the water.

In a cooling tower, the really important actually is cooling tower fill. Fill is a plastic sheet used in cooling towers to build the more surface region of the tower. If we want to expanded surface, we need to take considers into making more contact about water and fills, so that water will have more surface area in the cooling tower fill.

Cooling tower fills make hot water have much more surface area with sheet and air and the medium of tremendously extended film fill, so that hot water is cooled quickly.

After be cooled the water is flow in a water container from which it is pumped again to cooling other hot water, and the warm air leaving the fill and releasing from the above of the cooling towers ,and like this Continuously cooling air from bottom and release warm air from above to keep cooling tower cooling hot water continuously, to reduce the load of urban tap water supply network, and reduce the operating cost, So that we could make full use of water resources.

Filler is the most important part of the cooling tower, and its efficiency depends on the extent to which the cooling water and air are fully in contact with the filler. Filler temperature 50 °C ~ 68 °C, anti-aging, excellent performance, anti-ultraviolet, long life.

Cooling Tower Filler should be made to have more contact about water and fills , and longest time as possible. Fill allows the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.

Cooling Tower Fill Specification