JMT MOULD

BUCKET MOULD FACTORY

Owing to our proficiency in this domain, we are offering our clients a wide gamut of bucket Mould. The offered mould is extensively used for designing of various kinds of buckets. Manufactured using high quality raw material and cutting-edge technology, this mould is available in different designs, shapes and sizes as per the specific requirements of clients.

About paint bucket mould, we make from 50ml to 20L with handle, for example: 100ml, 500ml,1L, 1gallon, 5L, 10L, 15L, 20L and so on. Bucket and cover mould are normally hot runner used, handle mould can be cold runner to save money. Hot runner can be chinese brand or international brand, like YUDO. For cover mould, we will make injection gate inside to let surface smooth and better for IML process.

Cavities can be one cavity for bucket and cover, handle can be 4 cavities.

For the bucket less than 1 gallon, body can be 2 cavities, cover can be 4 cavities.

About mould steel, P20, 718, H13 and 2344 are widely used. Different requirements will need different mould steel.

We could support for different testing according to project requirement, the common testing for the paint bucket samples include:

1.stacking: bucket sample could stack stable five pcs without deformation or breaking; when the lid take off, the bucket to bucket could stack well and take out easily for taper type, height should according to design requirement.

2.weight: the total weight within tolerance.

3. Water seal: put the bucket upside down for 24hours to check if any water come out or not.

If you want to make any paint or mop bucket mould in china, if you are looking for high quality mould maker, pls don’t hesitate to contact me.

BASIC INFOMATION