compatible Philips M2501A ETCO2 sensor probe,8pin

compatible Philips M2501A  ETCO2 sensor probe,8pin
Model:CM-02
Brand:Caremed
Origin:Made In China
Category:Home Supplies / Personal Care Appliance
Label:Philips ETCO2 , Philips CO2 Sensor , Vital Sign ETCO2
Price: US $385 / pc
Min. Order:1 pc

Product Description

 Features  

1.Real time CO2 monitoring and data upload

2.Dual wavelength , non-dispersive infrared(NDIR)

3.With fast electrical modulation MEMS IR source, moving part was avoid and long lifetime was achieved

4.Includes temperature control system, to prevent airway adapter condensing

5.Barometer pressure and Gas temperature compensation

6.Patent on calibration algorithm, no routine user calibration required

7.Small size and lightweight

 Transducer Type  Mainstream CO2 Sensor
 Principle of Operation  Non-dispersive infrared(NDIR), dual wavelength, no moving parts
 Initialization Time  Capnogram displayed in less than 5 seconds,full specifications within 2 minutes
 CO2 Measurement Range  0 – 114 mmHg, 0 – 15 %, 0 – 15.2 kPa(760mmHg)
 Rise Time  

Less than 60 ms - Adult Reusable or Single-Patient-Use Airway Adapter

Less than 60 ms - Infant Reusable or Single-Patient-Use Airway Adapter

 CO2 Resolution  

0.1mmHg         0 to 59 mmHg

0.25 mmHg        60 to 114mmHg

 COAccuracy  

0 – 40mmHg       ±2 mmHg

41 – 76 mmHg     ±5% of reading

77 – 114 mmHg    ±8% of reading

Above 80 BPM     ±12% of reading  

 CO2 Stability  

Short term drift: Drift over four hours shall not exceed 1 mmHg maximum

Long term drift: Accuracy specification will be maintained over a 120-hour period

 Sampling Frequency  100 Hz

 

Respiration Rate Range 2 to 150 Breaths Per Minute (BPM)
Respiration Rate Accuracy ±1 breath

Compensations

(Supplied)

Barometric pressure: 400 mmHg to 800 mmHg

Operator selectable O2, N2O, He and agent compensation

Calibration No routine user calibration required. An airway adapter zero is required when changing
Airway Adapters Single-patient-use or reusable, < 5 cc dead space (adult), < 1 cc dead space infant
Voltage Requirements 5.0 VDC  ±5%
Power Consumption

1.2Watts typical (Steady State)

Up to 1.8 Watts maximum on power up (Warm up)

Interconnection

(The RS232 connector version is also provided)

Standard - Lemo Redel 8-pin plastic connector

Pin out:

1.       VA           5.0VDC

2.       Shield        Shield

3.       DGND        Digital return

4.       VSRC         5.0VDC

5.       TxD          Serial data from Sensor

6.       RxD          Serial data from Host

7.       AGND        Analog return

8.       SYNC         Unused

Data Interface RS232 , bi-directional, 19200 baud rate, standard N-8-1.
Data Output CO2 gas concentration(mmHg), End-tidal CO2, Inspired CO2, Respiratory Rate. Gas and barometric pressure compensated when supplied by host.
 Temperature and Humidity

Operating:  0 to 45℃, 10 to 90% RH, non-condensing

Storage:  -40 to 70℃, <90% RH, non-condensing

 Water Resistance  IPX4 – Splash-proof (sensor head only)

 

Relatived products:Spo2 sensor,ECG&EKG Cable,IBP Cable,Temperature probe,NIBP cuff,TOCO&Fetal accessories;

Oxygen sensor,EEG Cable,Ultrasound probe,Finger pulse oximeter etc.

compatible Philips M2501A  ETCO2 sensor probe,8pin 1

Member Information

Shenzhen Caremed Medical Technology Co Ltd
Country/Region:Guang Dong - China
Business Nature:Manufacturer
Phone:15019417082
Contact:Emily Zhao (Sales)
Last Online:20 Nov, 2024