The new reducer also has to go through a period of runin in the process of use, because the clearance of some newly assembled parts will be relatively small, but also because of assembly, lubricating oil is not easy to form a uniform oil film on the friction surface to prevent equipment wear.

Running-in period is an important link to ensure the normal operation of 6JS reducer, reduce faults, and extend the service life of the equipment. However, many users will lack sufficient understanding of the reducer. In order to put it into use as soon as possible, this runin period will be omitted.

What are the characteristics of the run-in period of 6JS reducer:

1. Wear speed of reduction gear is accelerated. 2. Insufficient lubrication. 3. There is loosening. 4. Leakage occurs.

What are the problems caused by improper running in?

1. Gear and bearing of reduction gear wear too fast. 2. The lubricating oil cannot form a uniform oil film on the friction surface of the equipment, which will lead to insufficient lubrication. 3. There will be looseness, and some parts will have deviation of character and size, because they will be deformed by heat in the early stage. 4. Leakage occurs.

If you can not do enough understanding and understanding, it will be easy because of improper operation and failure, only the run-in period of 6JS reducer is good, in order to work smoothly in the future.