The hydraulic support connector is a vulnerable part. After the casting was used, the forging process was changed because the strength could not meet the requirements. Today, I have a preliminary understanding of the processing technology of the hydraulic support connector.

At first, the free forging process was adopted, and later it was changed to gas cutting forming. Due to the limited forging tonnage, the blank margin produced by forging has a large rough edge, and the forming ability of semicircle ball is poor. Later, after improvement, it can save materials and man-hour, simple operation, high production efficiency, flexible process operation, and local forming.

As the main connecting part of hydraulic support, the connecting head is easy to wear out, so it has high requirements on material technology. On the one hand, it can improve the service life and then reduce the maintenance and replacement cost. If you have the purchase requirement of hydraulic support connector, you are welcome to contact us in time.