BLR/C Welded&Flanged Helical Oil Separator

Model:	C-1503S
Brand:	BLUE
Origin:	Made In China
Category:	Construction & Decoration / Building Heater
Label:	Helical , oil separator , condensing units
Price:	US $60 / pc
Min. Order:	1 pc

Inquire Now

Product Description

General Description：

Oil separators should be installed vertically on the discharge line,as close as possible to the compressor

Connection diameter of the oil separators should be higher than or equal to the diameter of discharge line

In the case of a multi-compressor installation mounted in parallel,it is recommended to use one oil separator by compressor,in order to keep an optimal efficiency at all operating rates,otherwise,the separator should be selected based on the sum of each compressor's maximum capacity.

The oil separation performances will depend directly on the flow rate of the oil/refrigerant mixture at the inlet of the separators.

In order to prevent all risks of refrigerant condensation,it is recommended to not install the oil separators in the air flow produced by the fans,In a cold environment,it may be necessary to provide for the installation of an heat insulation or a heating element around the separators.

The efficiency of the oil separation is never 100%,especially with variable operating .

Model	Connection (ODF)	Connection type	Drawing No.	φ1	φ2	L	E1	E2	E3	E4	Carly Reference Model
BLR/C-1503 S	3/8	2	1	101.6	109	283	80	71	175	84	Turboil 1503 S	Turboil 1503 MMS
BLR/C-1504 S	1/2	2	1	101.6	109	283	80	71	175	84	Turboil 1504 S	Turboil 1504 MMS
BLR/C-1505 S	5/8	2	1	101.6	109	305	82	73	197	84	Turboil 1505 S/MMS
BLR/C-3006 S	3/4	2	1	101.6	109	308	85	76	200	84	Turboil 3006 S	Turboil 3006 MMS
BLR/C-3007 S	7/8	2	1	101.6	109	358	97	83	250	84	Turboil 3007 S	Turboil 3007 MMS
BLR/C-3009 S	1 1/8	3	1	101.6	109	390	107	80	282	84	Turboil 3009 S	Turboil 3009 MMS
BLR/C-3011 S	1 3/8	3	1	101.6	109	487	116	90	379	84	Turboil 3011 S/MMS
BLR/C-6009 S	1 1/8	3	1	101.6	109	434	107	80	327	84	Turboil 6009 S	Turboil 6009 MMS
BLR/C-6011 S	1 3/8	3	1	101.6	109	549	116	90	441	84	Turboil 6011 S/MMS
BLR/C-7011 S	1 3/8	3	2	152.4	156	419	149	114	249	109	Turboil 7011 S/MMS
BLR/C-8013 S	1 5/8	3	2	152.4	156	498	149	114	329	109	Turboil 8013 S	Turboil 8013 MMS
BLR/C-9017 S	2 1/8	3	2	152.4	156	512	162	127	342	109	Turboil 9017 S/MMS

Model	Connection (ODF)	Drawing No	Connnection type	φ1	φ2	φ3	L1	L2	E1	E2	E3	E4	E5	E6	Volume (L)	Carly Reference Model
BLR/C-F 2505 S	5/8	2	1	101.6	109	140	303	441	82	73	113	204	222	35	2.29	Turboil-F 2505 S/MMS
BLR/C-F 3007 S	7/8	2	1	101.6	109	140	355	494	102	83	113	204	222	35	2.62	Turboil-F 3007 S	Turboil-F 3007 MMS
BLR/C-F 3009 S	1 1/8	3	1	101.6	109	140	387	526	107	88	113	204	222	35	2.82	Turboil-F 3009 S	Turboil-F 3009 MMS
BLR/C-F 3011 S	1 3/8	3	1	101.6	109	140	485	623	116	90	113	204	222	35	3.56	Turboil-F 3011 S/MMS
BLR/C-F 7011 S	1 3/8	3	1	152.4	156	200	395	523	148	114	99	258	276	40	5	Turboil-F 7011 S/MMS
BLR/C-F 8013 S	1 5/8	3	1	152.4	156	200	428	555	148	114	99	258	276	40	6	Turboil-F 8013 S	Turboil-F 8013 MMS
BLR/C-F 9017 S	2 1/8	3	1	152.4	156	200	441	569	161	127	99	258	276	40	6	Turboil-F 9017 S/MMS
BLR/C-F 15013 S	1 5/8	3	2	219.1	224	150	492	821	174	149	307	126	249	35	11.5	Turboil-F 15013 S	Turboil-F 15013 MMS
BLR/C-F 15017 S	2 1/8	3	2	219.1	224	150	550	879	195	171	301	126	249	35	13.2	Turboil-F 15017 S/MMS
BLR/C-F 15021 S	2 5/8	3	2	219.1	224	150	565	894	215	184	301	126	249	35	13.4	Turboil-F 15021 S	Turboil-F 15021 MMS
BLR/C-F 30025 S	3 1/8	3	2	219.1	224	150	577	906	234	185	301	126	249	35	13.5	Turboil-F 30025 S	Turboil-F 30025 MMS