Introduction

 

  LST01-1A micro volume touch screen syringe pumps is single channel syringe pump which is mainly used in bio-laboratory. The acceptable syringe specification is from 10 μL to 10 mL. Suitable for high accuracy and small flow rate liquid transferring.

Technical specification

Syringe pump operating modes: push-pull mode

number of syringe:1

Maximum stroke:78mm

Stroke Resolution:0.156μm

Linear velocity range:5μm/min-65mm/min(flow=Line speed×Sectional area of the syringe)

Line speed adjustment resolution:5μm/min

Stroke control accuracy:error≤±0.5%(stroke≥30% of the maximum stroke)

Rated linear thrust:>90N

Option of syringe:the main syringe models of major manufacrurers for option

Syringe setting:can input the diameter of syringe directly

Flow calibration: more accurate flow of liquid by calibration

Operating parameters setting:dispensing volume and time etc 

Parameter to be displayed:volume,flow,line speed

Power off memory:can select if work as the previous status before power off when re-powered

Signal output:2 way OC gate signal output to indicate start/stop status.

Control signal input:2 way start/stop control terminal,1 way go down to control start/sotp by triger signal,

 1way TTL level signal to control start/stop

commuication interface:RS485

power supply:AC 90V-260V/15W

Suitable temperature:0ºC-40ºC

Suitable humidity:relative humidity<80%

Measurements:280×210×140(mm)
Weight:3.6kg

Function and Features of LST01-1A
Syrige diameter input:can select syringe in list or input the data of diameter directly.

Userfriendly manu:Large LCD screen 

Power off memory: 1.EEPROM save the set parameters after power, no need to re-set. 2. Under flow mode when power is restored 

  can continue to operate according to set parameters after power-up or stop

Jam protection function: When the working process of advancing the syringe pump mechanism is blocked, injection pump will stop 

  advancing mechanism work issued whistle alarm

RS485 communication with host PC

Exteral control:input / output control function

Flow calibration: more accurate flow of liquid by calibration

Syringe protection function:By adjusting the position of the stopper can prevent damage to the syringe

Other parameters of  LST01-1A 

 

Model	Suitable syringe	Inner diameter of syringe (mm)	Flow rate(μl/min-ml/min)
LST01-1A	10μl	0.50	0.001-0.0128
	25μl	0.80	0.0025-0.0327
	50μl	1.10	0.0048-0.0618
	100μl	1.60	0.0101-0.1307
	250μl	2.30	0.0208-0.2701
	500μl	3.25	0.0415-0.5392
	1ml	4.72	0.0875-1.1373
	2ml	9.00	0.3181-4.1351
	5ml	13.10	0.6739-8.7608
	10ml	16.60	1.0821-14.068
	20ml	19.00	1.4176-18.429
	30ml	23.00	2.0774-27.006
	60ml	29.14	3.3346-43.349