Outdoor All-in-one Cabinet    outdoor server cabinet     outdoor data cabinet    outdoor cabinet for mobile communication

 

outdoor network cabinet Description

In order to meet the none data room construction requirements of mobile communication distributed base station, satisfy the needs of communication environment of outdoor and device installation, the outdoor server cabinet is presented. For all kinds of outdoor small cells and macro cells which use the distributed device(BBU+RRU) can reference implementation, and  the communication device mounting area and integration power system can be configured based on the practical situation. The communication cabinet installed outdoor configure the compartments for installation communication device, power supply, battery, temperature controlling device and other corollary equipment ( like ODF and so on ) inside the cabinet, so that can provide the reliable mechanical and environmental protection and detachable assembly cabinet for internal normal operation which can be installed on difficult to carry place like outdoor, mountaintop and roof. It also has good functions of wind-proof, sand-proof, rain-proof, sun-proof and theft-proof. Heat insulation flame retardant cover of cabinet consist of low thermal conductivity interlayer flame retardant material, satisfied the spare parts site assembly, the level of protection is IP55. The outdoor all-in-one cabinet compartment use air-conditioning and heat exchanger to proceed the heat exchange.

 

Characteristics of Production

The distribution of inner space is rational and the structure is compact. Cabinet has special central facilities area, distributing district, battery area, distribution area, wiring area;

The door with the waterproof in front and back is openable, the theft-proof and damage resistance can achieve B level of the GA/T73-1994;

Design double cabinets both inside and outside, material of isolation layer is superior thermal insulating material which can achieve the temperature variations between inside and outside above -5℃;

Three radiating mode can be selected: fan mode, heat exchange mode, air-conditioning mode;

Particular appearance design, the cover is solid to prevent accumulation of the rain; meet the standards of 19" standard, the metric system standard, ETSI standard (European Telecommunications Standards Institute standard), GB/T3047.22-92 standard.

 

Jiancheng outdoor server cabinet Technical Parameters

Range of operating temperature: -40℃~+50℃;

Range of storage temperature:-25℃~+55℃;

Range of transport temperature:-45℃~+70℃;

Requirement of relative humidity: 5℃~100℃;

Atmospheric pressure: 62kpa-101kpa(approximate to altitude of 0m-5000m);

Solar radiation intensity: total radiation intensity 1120×(1±10%)W/㎡

Model	W*D*H	Capacity	Radiating mode
1018000	1100×1000×1650	24U	Fan mode
1018300	1100×925×1650	24U	Heat exchange mode
1018700	1100×925×1650	24U	Air-conditioning mode

 

Heat exchange

Mode Fan mode

Air-conditioner mode

 

Jiancheng is a data center manufacturer, which can customize the parameters and models of idc micro module. We also provide OEM and ODM full set of outdoor data cabinet solutions.

 

You can click here to learn more.

 

https://www.jch-electronics.com