|Origin:||Made In China|
|Category:||Industrial Supplies / Other Industrial Supplies|
|Label:||Vacuum membrane pres , Door Laminating Syst , Scissors Lift Table|
|Min. Order:||1 pc|
TM3000P-III Automatic pin positive and negative press vacuum membrane machine
the assembly line optimizes the production structure to separate the placement of the workpiece from the finished part, which greatly improves the efficiency of the assembly line. The device operates at full load with only three operators, creating more value for the workers' factory.
Fast speed: high glossy and normal workpiece enters the host and comes out within a working period of 2 minutes.It is 2 -4 times than one normal negative vacuum membrane press machine. The effect is good: the normal pvc film vacuumed products have clear grooves in place, no open edges, no foaming, no color difference, high gloss pvc film workpiece surface strong adhesion, and the effect reaches the international leading level.
Low energy consumption: the total power of the machine is 43kw, it is one one-half copare other factory equipment. The main heating power is 18KW, the average power consumption is 13kw/h, and the configuration is very high: the main components of the machine are made in Germany, Japan, and Taiwan. High configuration and stable performance.
High work efficiency: This machine use fully automatic top block, which saves the process that produce the bottom pad and saved raw material cost , saves the process raw material cost, saves the equipment's pad scanning action sequence, and saves the laminating processTime, greatly improve work efficiency and reduce labor costs.
High automation: This machine is equipped with automatic fabric selection roll-over stand and automatic film cutting device, automatic pad device, press laminating device, tray lifting device and finished product reversing device, etc., high automation, production process smooth, compact, one-stopstyle vacuum membrane process production.
Automatic pad you can choose 12mm,15mm,18mm, it solve the problem of high glossy pvc film can not reach the place.
Main technical parameter
|Working table size||3000*1270mm|
|Max working height||50 mm|
|Working pressure||Positive press ≥0.55mpa negative press≥-0.095mpa|
|voltage||380v 50hz 3 ph|
This site is not available for reply
Pls contact me
ShenYang Zhanhongtu Machinery & Equipment Co.,Ltd
|Liaoning Zhanhongtu Machinery & Equipment Co.,Ltd|
|Country/Region:||Liao Ning - China|
|Last Online:||06 Jul, 2022|