Dehydrator    plastic particles dehydrator    plastic dehydrator   automatic dehydrator for sale

 

Dehydrator: 15KW (material is stainless steel 304)

Introduction:

The plastic pellet dehydrator machine uses spiral, push-up, separation, and dehydration, and automatically feeds and discharges in one time.
Suitable for polyester sheets, cable skins, wire tubes, etc.

 

Zanhong Dewatering Machine Description

Dehydrator machine: It uses screw, push up, separation and dehydration, automatic feeding and discharging are completed at one time. It is suitable for drying plastic particles such as polyester sheets, cable sheaths, and wire and pipe materials.

The dehydrator have four kinds: vertical dehydrator, horizontal dehydrator, full-screen dehydrator and half-screen dehydrator. It is suitable for dehydration and drying of various flakes, with corrosion resistance, high efficiency and long life.

 

zanhong plastic dehydrator features

1. It is suitable for dewatering and air-drying plastic crushed materials, raw materials, and sheets for reuse.

2. High-speed centrifugal dehydration, automatic discharging, low power consumption, fast efficiency

3. The drying effect is over 97%.

4. The powder can be discharged evenly with its materials to reduce loss.

5. The high degree of automation greatly reduces labor intensity.

6. Advanced production technology, easy cleaning, low noise, safety and durable.

 

Working principle：

The PP particles after blanching contain a certain amount of water and cannot be used directly. The plastic pellet dehydrator machine is mainly used for the dehydration function of PP pellets so that the finished product can meet the storage requirements. The wet PP particles are gradually raised by the auger of the plastic pellet dehydrator machine, and more water is extracted by the principle of high-speed rotation. The machine can automatically feed and discharge, no need for the manual operation, and greatly improve work efficiency.
Use range:
PET pellets, polyester sheets, wire tubes, cable skins, etc.

 

Function:

The plastic particles dehydrator is a simple and effective cleaning and dewatering equipment for recycling waste plastics. It plays an important role in the transportation process. At the same time, the plastic pellet dehydrator machine completely replaces the feeding link and adds cleaning and high-speed dewatering functions, called advanced automated flow production equipment.

 

Specifications:

1. This plastic pellet dehydrator machine is widely applicable to dewatering for crushed material of plastic, just like PET bottles, flakes,  sheet, etc.
2. Screen, using high-quality stainless steel material, rotor, and body, equipment is durable;
3. Production of advanced technology, the spindle through dynamic and static balance, rational design, low noise, easy to clean, you can easily open the body, remove dryer internal sieve impurities;
4.Good dewatering effect, less power consumption, and efficiency, continuous production, the high degree of automation, saving;
5. In addition to dehydration, plastic pellet dehydrator machine can wash the plastic micro-small debris such as sand.

 

We are a pet bottle recycling machine supplier, Zanhong develops and produces a series of machines for washing and recycling waste PET bottles; pet bottle washing line, PET Winnowing Machine, plastic crusher, plastic bottle label remover, etc.

 

If you want to know more about pet production equipment, please click here to visit our website.

 

https://www.chinazhmachine.com