Description:
RM gearmotors with extended output bearing hub are a special type of helical gearmotor. They were designed especially for agitating applications and allow for high overhung and axial loads and bending moments. The remaining data corresponds to that of standard helical gearmotors.
 

Features:

1) Horizontal deviation of input shaft to output shaft is small, take full advantages of gearbox space, 2-stage gear and 3-stage gear is in the same box.
2) Box of R series reducer is unitary, so its structure rigidity is good, strength of shaft and lifetime of bearing is improved.
3) Mounting mode: Foot-mounted, flange-mounted, there are big flange and small flange so select easily.
4) Solid output shaft, average efficiency: 2-stage 96%, 3-stage 94%, combination 85%.
5) Ratio: Ratio of 2-stage is 5-2408, ratio of 3-stage is 27.2-192, ratio of combination is up to 23401.
6) For 2-stage basic type geared, ratation direction of input shaft is the same that of output shaft; For 3-stage basic type geared, their directions are reverse; For combination, please contact MRD.
7) RM is designed specially, can load larger axial and radial force.

Selection Table: