MPO / MTP optical fiber distribution frame (box) is used in large data center room MDF, IDF wiring area optical fiber backbone connection and distribution unit management need high-density integrated optical fiber line environment, realize FTTx and 40 / 100g SFP and other light-emitting module connection. Installed in 19 inch rack and cabinet, it can be configured with MPO / MTP pre terminated module box or MPO / MTP adapter front panel.

MPO high density optical fiber distribution frame | MPO pre termination module | MPO optical fiber distribution frame | MPO optical fiber junction box | MPO module plug box | MPO optical fiber jumper | MPO optical fiber connector | MPO optical fiber adapter | mpo-mpo trunk cable | mpo-lc / SC / FC sector branch trunk cable | data center MPO high density optical fiber pre connection system production base!

 

Product application:

 

Product features:

 

2. Optical fiber cable inlet: several.

 

3. Mpo-1u optical fiber distribution frame (box) can be installed with four MPO or MTP pre termination boxes. The pre termination box is installed with duplex LC adapter, and the maximum number of transmission optical fiber cores is 96.

 

5. The MPO 3U optical fiber distribution frame (box) can be installed with 12 MPO or MTP pre termination boxes. The pre termination box is installed with duplex LC adapter, and the maximum number of transmission optical fiber cores is 288.

 

7. MPO / mtp-lc module box adopts imported lock and strip adapter panel.

 

9. The pull-out structure can be pulled out freely, which is easy to operate and has good sealing performance for dust prevention.

 

Fiber type: single mode, 10 Gigabit multimode

 

Return loss APC ≥ 60dB UPC ≥ 50dB

 

Tensile strength ≥ 120N (except 0.9mm optical cable)

 

Storage temperature - 35 ℃ - + 75 ℃

 

Bending radius of optical fiber: ≥ 40mm

 

-----Optical fiber products in the era of cloud computing and big data

 

MPO / mtp-lc pre termination module box is mainly used to branch the 12 core MPO connector of the backbone optical cable terminal into a conventional dual core connector. The specific feature is that the front end of the module box is LC adapter (flange) port, generally 12 duplex or 6 quadruple adapters are used, and two MPO or MTP adapters are installed on the back. In the module box, the front panel LC duplex adapter (flange) is directly connected with the back MPO or MTP adapter to form a whole. Each independent MPO / mtp-lc pre terminated module box is placed in the optical fiber distribution frame to form a complete MPO / mtp-lc optical fiber distribution frame (box).

 

1. The branch of 12 core MPO / MTP connector is converted to LC duplex connector;

 

3. The front panel is equipped with LC adapter, and the rear panel is equipped with MPO / MTP adapter;

 

5. All ports are labeled on the front end for easy identification and search.

 

The system transmission performance and wiring quality can be greatly improved through factory termination and testing;

Based on the modular design, it can realize the quick connection of system components, greatly reduce the construction cost on site, and realize the rapid recovery of system failure.

When the data center is upgraded and changed, the pre termination system can reduce the risk of mobility;

Its high-density features will also greatly save cabinet space, which is conducive to reducing the energy consumption of the data center;

Strong versatility, easy to upgrade to the next generation of optical fiber cabling system in the future.

 

MPO adapter, including key up key down, key up key up

 

Parameter value insertion loss (DB) ＜ 0.7, 500 times change (DB) ＜ 0.3, working temperature (℃) - 40 ～ + 85, storage temperature (℃) - 40 ～ + 85

Mpo-lc / SC pre terminated sector fiber refers to the use of MPO single 12 core or 24 core connector at one end and LC / SC connector at the other end. This product is mainly used in the pre terminal module box to connect the jumper between the pre terminal trunk optical cable and the equipment, so that it can be modularized and plug and play. Compared with the traditional fusion, it greatly improves the convenience and efficiency of work.

 

The customized jumper length can match with the module box, which is convenient for fiber winding.

 

There are mainly two types of MPO backbone cables: 1. Mpo-mpo backbone cables; 2. Mpo-lc / SC / FC sector branch backbone cables; 3;

 

■ MPO backbone optical cable numbering rules (each space represents one digit)

Each MPO pre terminated optical cable contains 12 core optical fibers, which can be connected by pl ing and unpl ing at one time;

The optical cable adopts circular double-layer reinforced sheath structure, which overcomes the bending sensitivity problem, has higher strength and is convenient for construction and placement.

The sheath and pull ring are used to facilitate the construction and provide protection for the plug during wiring;

At present, it can provide 62.5/125 μ m (om1) standard multimode fiber, 50 / 125 μ m laser optimized 10 Gigabit (OM3) multimode fiber, and low water peak single-mode fiber pre termination products.

The end face of MPO plug has two structures, male and female, which can be selected according to the actual situation.