graphite ring is made of low-sulfur expanded graphite tape by winding and molding, with precise size, fixed density, and without any external fillers or adhesives. Generally, the cross-section is square, but also can be wedge-shaped V-shaped. The latter two are suitable for high-pressure parts, reinforced graphite packing ring, expanded graphite packing ring, lined with stainless steel foil, net, etc., which can improve the pressure capacity. Corrosion-inhibited graphite packing ring application: It has the characteristics of expanded graphite and can withstand violent alternating temperature and pressure. It is an ideal packing for valves and various static seals. In addition to avoiding use when the valve stem is severely damaged, it can be used alone or in combination with high carbon fiber packing end rings to prevent packing extrusion. Technical parameters Temperature 500℃ PH value 0-14 Linear speed 10m/s Pressure blower 10bar Mixer 50bar Valve 800bar
Suitable for high temperature, hot water, high pressure steam, heat exchange fluid, nitrogen, organic solvents, hydrocarbons, cryogenic liquids and other media, used in compressors, pumps, valves, chemical instruments, meters, reactor tower packing . Application range:
Temperature: -200 to +850 ℃ Temperature: -200 to +850 ℃
Pressure: 50.0MPa Pressure: 50.0 MPa
Line Speed: 30 Line Speed: 30
PH value: 0~14P H values: 0 ~ 14
Supply form:
There are two types of incision and no incision.
The incision can be divided into straight incision and oblique incision.
Rule: Inner diameter: φ6~990mm Outer diameter: φ12~1100mm
For special-shaped packing rings, please provide specific drawings and dimensions. /jssealing[at]163[dot] com