Application:

Safety valve calibration stand/safety relief valve test stand is designed for performance test on direct loaded or pilot operated safety valves, such as valves’set pressure, blow-down pressure, leakage and etc.

Technical Data:

            · Test pressure: 0-70MPa

            · Valve size: DN 10—DN600mm

            ·  Valve Tyep: flange or threaded

            · Test medium: Nitrogen, Air or Water (Optional)

            · Test port: 1port

            · Clamping Method: Hydraulic cylinder with 3claws station

            · Pressure precision: 0.4 class pressure gauge (Optional )

            · Pressure Transducer: ±0.5% accuracy

            · Driven air: 6-8bar (workshop air) 

            · Power supply: 380V AC, 50Hz (Optional)

            · Dimension: 1300×800×1200mm