Features & Benefits  
TENSAN Thermally Conductive Silicone Sealant is thermally adhesive with heatsink and has good sealing strength.Thermally Conductive Silicone Sealant is mainly used for electronic industry to bond two items or fill gap and conduct the heat.

1.REACH, ROHS certified

2. MSDS for air/sea shipment

3.Non-corrosive to most metal material

4. Excellent thermal conductivity

5.Good resistance in change of hot and cold temp

6.Good Performance for insulation  

Typical Properties 

Thermally Conductive Adhesive
Property	Test Method	TS5505	TS5505L	TS5505M	TS5505H
Color	Visual	White	White	Grey	White
Viscosity (KCPS)	Brookfield Viscometer	60	60	60	60
Specific Gravity (g/cc)	Helium Pycnomter	2.0	2.2	2.6	2.9
Operation time(mins)	/	60	60	60	60
Thermal Conductivity (w/m.k)	Hot Disk	1.0	1.3	1.5	2.3
Thermal Resistance@50psi	ASTM D5470	0.08	00.08	0.08	0.06
Breakdown Voltage (KVac/mm)	ASTM D149	>6	>6	>6	>6
Volume Resistivity (ohm-cm)	ASTM D257	5*1014	5*1014	5*1014	5*1014
Dielectric Constant@1MHz	ASTM D150	6.0	6.0	6.0	6.0
Hardness (Shore A)	ASTM D2440	65	70	80	86
Elongation (%)	ASTM D142	180	170	150	110
Shelf Life (Month)	/	6	6	6	6
Usage Temperature Range	/	-50~+200	-50~+200	-50~+200	-50~+200
Cure Condition	/	24H	24H	24H	24H
UL Flammabitily Rating	UL94	V-0	V-0	V-0	V-0

 

Data Sheet

Property	Unit	TS8800	TS8811	TS8822	TS8833	TS8866
One or Two Part	/	Two	Two	Two	Two	Two
Color	/	Grey/Black	Grey/Black	Grey/Black	Grey/Black	Grey/Black
Viscosity (Part A)	cP	4500	3800	3500	3500	4500
Viscosity (Part B)	cP	3800	3600	3500	3200	3500
Mix Ratio	/	1:1	1:1	1:1	1:1	1:1
Viscosity (Mixed)	cP	4500	3800	3500	3400	4200
Thermal Conductivity	W/mk	0.6	0.6	0.7	0.8	1.0
Specific Gravity (Cured)	/	1.8	1.58	1.6	1.7	1.9
Working Time at 25°C (Pot Life-Minutes)	min	30-60	30-60	30-60	30-60	30-60
Cure Time at 25°C	hrs	24	24	24	24	24
Cure Time at 80°C	min	25	25	25	25	25
Durometer Shore A	/	45	50	45	50	50
Dielectric Strength	kv/mm	18	24	24	24	22
Volume Resistant	ohm*cm	1.5*1015	1.5*1015	1.5*1015	1.5*1015	1.5*1015
Dielectric Constant at 100Hz	/	2.5	2.8	2.8	2.88	2.88
UL 94Flame Classification	/	HB	V-1	V-1	V-0	V-1

Typical Applications 

This material is widely applied in electronics products like consumer electronics, power supply , lamp devices etc.

1. Used to replace thermal grease for CPU and its heat sink conductor

2.Used in SCR intellectualized control module and its radiator

3.Used to fill the gap between electronic module and radiator and make heat conduct


Packing Information 

1. Hard plastic tube 100 ml

    100 tubes / carton

2. Hard plastic tube 300 ml

    24 tubes / carton

3. Hard plastic tube 2600ml

    4 tubes / carton

4. Customized packing is acceptable

Storage and Validity

1.Keep away from children .

2.Stored  in a cool, ventilated, dry place.

 

NOTES
1.This material is harmless under specific safe measures. But that doesn't mean some people are not allergic to it.

2.Take measures to protect our skin from touching the gel like wearing impervious rubber or plastic gloves and protect our eyes.

3.After using the material, we need to clean our skin with soap and warm water and avoid using the solvents.

4.Use disposable paper towel to rub our skin.

5. Keep ventilation in the work place.

FAQ
Q1: Do you provide samples?
A1: Yes,we can offer free samples. Just please pay the shipping fee.

Q2: Are you factory or trading company?
A3: No, we are a professional manufacturer for over 6 years.

Q3:Do you provide after sale service?
A3:Yes. We have professional teams to help you solve the problems.

Q4:What other products do you have?
A4:We have thermal grease,thermal pad,silicone potting,SMT red glue and so on.