Dispensing Machine SMT Red Glue Heat Curing

Model:	TS4108A
Brand:	Tensan
Origin:	Made In China
Category:	Chemicals / Adhesives & Sealants
Label:	red glue , SMT red glue , red glue adhesive
Price:	US $1 / pcs
Min. Order:	100 pcs

Inquire Now

Product Description

Dispensing Machine SMT Red Glue Heat Curing

Tensan's SMT red glue is a range of adhesives developed for temporary chip-bonding, prior to the wave-soldering process.They are all single component, heat-curing, epoxy adhesives which have excellent preservation qualities. "Seal-glo NE series" not only have rapid curing properties, with a 1~2 minute heating duration between 90~150ºC, as required for SMD mounting, their fine properties enable them to be applied by both high speed dispensing and screen printing alike. We have a wide range and variety of grades to meet specific customer requirements

Features & Benefits of Red Glue

REACH, ROHS certified
Excellent thixotropy
Good adhesive strength after curing
Easy to mix and use

Typical Properties of Red Glue

Property	Unit	TS4108A	TS4109A
Specific gravity	g/cm3	1.28	1.38
Viscosity at 25ºC, 5rpm	25ºC,5rpm	300.000cps	390.000cps
Adhesive strength	2125c	44N(4.5kgf )	38N(3.9kgf )
	Mini-mold tr	45N(4.6kgf )	38N(3.9kgf )
	SOP-IC 16P	92N(9.4kgf )	92N(9.4kgf )
Thixotropy index		6.3	5.0
Electric property	Ω*cm	2.6*1016	1.8*101
resistance Insulation	Ω*cm	1.0*1014	3.4*1014
ResistanceInitial value	Ω*cm	1.2*1012	2.1*1032
Curing condition	----	150ºC/60sec 130ºC/90sec	150ºC/60sec 130ºC/90sec
Applying method	----	High-speed dispenser	Screen printing Thick mask
Dielectric constant	----	3.62/1MHz	3.8(100K Hz)
Dielectric loss tangent	----	0.013/1MHz	0.027(100KHz)
Preservation condition	----	Refrigerated storage at 2~10 ºC
Package style	----	200G/30CC

Instructions and Precautions of Red Glue
Cold storage, to be rewarmed before use, 30ml syringe to be 1 hour, 300ml 24 hours. Storage tank or dispensing mouth temperature at 25ºC-30ºC can help improve the high-speed dispensing effect.

Precautions of Red Glue

In order to avoid contaminating unused glue, any glue can not be back into the original packaging.
Glue placing in the air will absorb trace moisture performance, which will influence the properties of glue, so it should be avoided. In the stencil printing, do not put SMT printed circuit board in the air for too long, patch curing as soon as possible, if possible, air humidity should be controlled.

Packing Information
30ml/syringe
200g/syringe