Main Chamber

stainless steel SUS304，thickness 3mm .

Internal surface：stainless steel wire drawing processing.

Outside surface：spray lacquer，white.

Window panel

10mm organic glass ,wide angle without any dead space.

Valves

In and out of the balloon made up of stainless steel SUS304 , the valve inside and outside with filters can inlet water and air,some instrument(such as Spin Coater) can put in the main box then pump to vacuum by the valves.

Lighting system

White light without ultraviolet ray，set front of each glass

Power supply

Perforated power socket equipped in the main chamber to meet customers’need of use internal instruments.

Glove

Glove box use the industrial grade corrosion resistant latex gloves,the mouth of the glove is fixed with a sealing ring. 

Reserved Interface

Reserved interface of KF ,glave box can upgrade at any time.

Model

VGB-1A

Materials

stainness steel SUS 304

Main chamber Size (MM)

600W*450D*420H

Antechamber Size (MM)

/

Door

Manually operated door 300*260MM

Stand soppost

Alternate configuration

Humidity Automatic Controller

Automatic control of humidity and moisture in the glove box,get out of the humidity blind zone.

Pressure Control System

Pressure constant in the box，be well used in dealing with the leak of harmful powder.

Oven

If you need vacuum backing，you can choose transition chamber heating mode.

Purification System

The water and oxygen numerical usually stay about 200PPM after picking up the suction and inactive gas.

With the purification system , the water and oxygen numerical can stay＜1PPM.

Dust Pelletizing System

The interior reaches the purification level : hundred/thoustand. You can choose different dust pelletizing system to meet you need.