Premium provide low cost and high speed sheet metal stamping processing which is a manufacturing process that can produce a high volume parts and components. Stamping are suitable for both short or long production runs, and be conducted with other sheet metal forming process, such as bending, punching, blanking and welding, and may consist of one or a series of specific processes or techniques.

 

Types of Our Sheet Metal Stamping Services

Our Metal Stamping includes progressive die stamping, transfer die stamping, fine blanking and short run stamping.

 

1. Progressive die stamping

 

Progressive die stamping is suitable for large volumes of parts production with strict tolerances. This stamping method involves feeding a coil of metal through the stamping press that punches, bends, and shapes the parts synchronously.

 

Progressive die stamping is the ideal processing with complex geometry to meet:

 

Lower labor cost

 

Faster turnaround

 

Shorter run length

 

Higher repeatability

 

2. Transfer Die Stamping

 

Similar to progressive die stamping, but the part is separated and a strip of metal is fed into the first station of a mechanical transport system, the blank for the component is cut from the strip. The blank is then transferred mechanically through various forming stations until the part is finished.

 

3. Fine Blanking

Fine blanking/fine-edge blanking, is valuable for providing high accuracy and smooth edges, that is nearly impossible using a conventional metal cutting or punching process.

Fine blanking can pierce very small holes, for which holes are very close to the edge of the part and close to other holes.

 

4. Short Run Stamping

The largest advantages of short run stamping is the quick turnaround times. Short run stamping is more cost efficient, as regards to smaller volume orders, minimal tooling expenses are needed. Premium also helps with the reduction of revisions and maintenance, which will save costs as well.

Advantages of Our In-house Service

A wide variety of material:	Aluminum, Stainless Steel, Cold Rolled Steel, Copper/Brass/Bronze, Exotics including platinum, gold
Facilities	15 to 400 ton presses
Thickness Range	0.025mm-15mm
Finishing options	Metal plating, bead blasting, anodizing, plating, powder coating, silk-screen printing, polishing and custom finishes
Tolerance	+/- 0.01 to 0.005mm
Typical Part Die Set	$1,000 – $4,000
Typical Part Delivery	3 – 4 weeks

 

Premium is a professional sheet metal stamping company. We provide Plastic Injection Molding, Die Casting, precision machined parts, precision metal stamping parts, custom metal stamping services, stamped stainless steel sheets, custom sheet metal stamping, sheet metal stamping die, sheet metal stamping design, stamping aluminum sheet, plastic injection molding service and so on. Want to know more? Please contact us.