Three zones Thermal shock testing chamber

Model:	HD-CTS3-1J
Brand:	-
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Other Electronic Instrument
Label:	-
Price:	US $25000 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Three zones Thermal shock testing chamber

This chamber is designed for cyclic climatic tests, to test temperature resistance of samples in a rapid temperature change.

The design of this chamber includes:

² High temperature zone;

² Testing (working) area;

² Low temperature zone.

The working area of this chamber is fixed, and equipped with dampers for supplying hot and cold air. Samples for testing are placed in the working area. Use damper to supply hot and cold air to change the temperature of the working area in a very short time.

Model		HD-CTS3-1J	HD-CTS3-2J	HD-CTS3-5J	HD-CTS3-10J
Internal volume (L)		120 L	210 L	504 L	900 L
Internal dimensions (DWH)		400500600 mm	500600700 mm	700800900 mm	90010001000 mm
External dimensions (DWH)		16201460 2360 mm	17201560 2460 mm	21201820 2260 mm	242020202660 mm
Preheating area	Preheating temperature upper limit	200℃
	Heating time	R.T.~+200℃: 40min (approximately)
Pre-cooling area	Pre-cooling temperature lower limit	-75℃
	Cooling time	R.T.~-70℃: 90min (approximately)
Working area	Temperature shocking range	High temperature: 60℃～+150℃; Low temperature: -55℃～-10℃;
	Temperature fluctuation	≤±0.5℃
	Temperature deviation	≤±2℃
Temperature recovery time		≤5min
Material
Shell		Cold rolled sheet steel, spray plastics on surface
Internal material		Stainless steel
Thermal insulation material		Polyurethane foam + glass wool
Refrigeration system
Refrigeration mode		Mechanical compression, two-stage refrigeration
Cooling mode		Water cooling
Compressor		Imported compressor
Controller		Programmable logic controller, 7’’ LCD touch screen
Power supply		АС380V, 50Hz, Three-phase four-wire + earth wire