510 adopts 2.5U height standard 19" rack mountable chassis for exchange office. The powerful switching matrix provides 256 x256 non-blocking cross connections. System supports maximum 96 x E1, and 96 x 64Kbps channels with the expansion chassis. Various network cards, such as PDH, E1 and TDMoIP (Ethernet) uplink card are available for fitting different networks requirement.
System designs with reliability enhancement, such as redundancy controller, 1+1 uplink and dual power supply. It can configure for point to point or point to multipoint networking with different type of transport media; and it can execute D/I (drop/insert) function by cross connection matrix as well.
PT-50T 2510 is managed by the powerful NMS system for real time monitoring, local / remote diagnostic and alarm control. System software can be downloaded remotely through the management control center without engineer on site.

Enhanced redundant and hot swappable design for controller, network interface and power supply;

Ø Reliable system design with redundant controller, 1+1 optical link protection and dual power supply;

Ø Synchronous data module includes 64Kbps co-directional, N×64Kbps data interface;

Ø Voice module includes FXO, FXS, Hotline, Magneto, Carrier-wave and 2/4-wire E&M interface;

Ø RS485、G703;

Ø NMS port: RS232 or Ethernet interface;

Ø Power supply with AC220V or DC-48V, or AC220V + DC-48V.

E1 Interface

Bit rate: 2.048Mbps ±Code type: HDB3 code, G.703 standard;

 or 120WFrame structure: G.704, G.706 ;

Output optical power: ≥-15dBm;

Optical wavelength: 1310nm/1550nm;

Power Supply

Input voltage: -48Vdc or 220Vac;

Power consumption: <150W .

Standard: IEEE 802.3, IEEE 802.1Q (VLAN);

Operation Environment

Working temperature: -10°C ~ 50°C;

Storage temperature: -40°C ~ +80°C.

Net weight: 10Kg.

Application


                                                                            point to point application

 

                                                                          Point to multi-point network