CICsorb Garment and Glove Thermal Insulation Lining Type C is the perfect insulation material for gloves, general outwear, sportswear, professional and work wear clothing. It warm yet lightweight, powerful yet thin can helps trap and hold body heat, while allowing moisture to escape. The extremely fine microfibers in CICsorb® Garment and Glove Thermal Insulation Lining help trap air and block body radiant heat loss, making it an efficient insulator. It is an insulation which is almost one and a half times warmer than down, when equal thickness is compared. The high warmth to thickness ratio of this insulation enables garment designs with less bulky and enhanced freedom of movement.

Technical data

 · Usage: Outerwear, Sportswear, Gloves and accessories

 · Composition: 65% Polypropylene + 35% Polyester

 · Weight range: 40 g/m2 - 600 g/m2

 · Surface: No fabric, one side fabric, double side fabric

 · Moisture Content: ≤ 0.4%

Garment construction

 · Type C: No scrim

 · Type CS: One side scrim

 · Type CDS: Double side scrim

Typical gram weights for various outerwear:

 · 40 gsm —— Hats and Gloves: Cool condition or high activity level. Jackets: Warm or Slightly cool conditions.

 · 70 gsm —— Hats and Gloves: Cold conditions or moderate activity level. Jackets: Cool conditions.

 · 100 gsm —— Hats and Gloves: Very cold condition or light activity level. Jackets: Between cool and cold conditions

 · 150 gsm —— Hats and Gloves: Extremely cold condition or very light activity level. Jackets: Cold  · conditions

 · 200 gsm —— Jackets: Very cold conditions.

Care Instructions:

 · Machine wash only garments:
+ Machine wash warm (40 °C, 105 °F), delicate cycle. Use only non-chlorine bleach when needed. Tumble dry, low heat. Do not steam press. Steam only or use cool iron.

 · Wash or dry-clean garments:
+ Machine wash warm (40 °C, 105 °F), delicate cycle. Use only non-chlorine bleach when needed. Tumble dry, low heat. Do not steam press. Steam only or use cool iron or professionally dry-clean.