E-003 Overhead Ionizing Air Blower is a device of the ionizing air blower series. The E-003 blower is an overhead unit designed to provide total coverage for electrostatic problems.

 

Please read the instruction manual completely before installing or operating the device. This device is equipped with a 3-wires grounding plug and must be pl ed into a 3-terminal grounded socket. Do not modifying plug or using an ungrounded power socket. If an extension cord is required, it should be used only a 3-wire extension cord with grounding.

 

Do not insert any object through intake or outlet grille.

 

Do not operate the unit under inflammable or explosive atmospheres.

 

Internal repairs or servicing should be done by SL-003 technician.

 

SPECIFICATION

Line Voltage                 220VAC/ 50 Hz or 110VAC / 60Hz

Current Consumption          Max.1.25 Amp (fan high, light on)

                             Min.0.62 Amp (fan low, light off)

Air Volume Output            Fan speed Flow

Low 120 CFM

High 330 CFM

(Flow amount equal to sum of 3 fans)

Air Flow Characteristics     40cm×120cm Area Coverage

Light Output                 1650 Lumens Total.

Replacement Lamp         13-15 Watt Energy Saving Fluorescent

Operating Temperature        32ºF(0℃)～122ºF(50℃)

Enclosure                     Stainless Steel

Finish                        Powder Coat

Size                         1100mm(L)×184mm(W)×110mm(H)

Optional Air Filter          30PPl Open Polyurethane Foam

Ion Balance(offset voltage)  0V+/-10V(It requires no calibration)

Testing Result(for reference only)

Away from Blower	Left 300mm	Center line	Right 300mm
300mm	1.8sec	1.3sec	1.7sce
600mm	2.5sec	2.2sec	2.3sec
900mm	5.2sec	4.3sec	4.8sec
1200mm	8.6sec	7.5sec	8.3sec

1. Ion balance and decay time is according to the ESD standard, the neutralizing static time is in the voltage of 1000V-100V.

2. Test data available using ME268A chargers plate analyzer.

3. Test figures are subject to the variation in the atmospheric conditions.